iCrap

What specifically are you skeptical of? the errors shown and detailed are clearly facts, I'm not sure how you can argue with that.

What specifically are you skeptical of? the errors shown and detailed are clearly facts, I'm not sure how you can argue with that.

Here is my new build completed: I ended up adding a separate, external cooling loop which runs through the wall and sits in the next room over, reason for this was my computer room was just getting way too hot compared to the rest of the house.
 
Specs:
5900x
EVGA 3080 XC3
32GB Corsair DDR4 RGB
Asus TUF B550 MATX
 
Cooling
2x Black Ice GTS 240 (internal)
2x Noctua NF-A12x15 / 2x A12x25
Phanteks Glacier R160
EK Velocity CPU Block
EK FC 3080
 
The external loop has: D5, 2x 360 rad, 1x 240 rad and is on quick disconnects so I can easily remove it and still run the system without it. With everything installed its a totally stealthy setup and you can't even see the tubes coming out of the PC. Ended up working better than I thought. 10c drop in the room temperature and over 20c drop in PC temps. Idle water temp is around 26-28c and load water temp maxes out at 32-33c.
 
 





 

Why is there a rusty old car (impala?) shoved in the back of the warehouse lol?

It's a PicoPSU.
 
As for cooling it's not really an issue. all this thing will be doing is controlling the 3d printer. I may add a cooling fan on the top cover. 

I wanted a very small PC to control my 3D printer, and i looked around at my spare parts and came up with this. It'll be a small 3d printed case which will house a pico PSU, AMD APU mobo and an SSD.

The case will have only one button on the front for a clean look... a 22mm vandal switch (it will be blue).



Here is the render of the case, I haven't finished the top cover yet. The top cover will include the SSD mounts along with a fan mount.
 
Once i take the final pics i'll use my DSLR instead of this crap phone cam. 
 


 
and... the print being started

 
Almost done printing...

 
The finished main case part (top cover is still not finalized and printed)


 
This is how it sits now... picoPSU and vandal switch installed along with all the wiring. Just need to finalize and print the top cover

 

I don't actually remember what CPU is on that mobo... is some little AMD thing. I've had this board lying around for a while. 

I wanted a very small PC to control my 3D printer, and i looked around at my spare parts and came up with this. It'll be a small 3d printed case which will house a pico PSU, AMD APU mobo and an SSD.

The case will have only one button on the front for a clean look... a 22mm vandal switch (it will be blue).



Here is the render of the case, I haven't finished the top cover yet. The top cover will include the SSD mounts along with a fan mount.
 
Once i take the final pics i'll use my DSLR instead of this crap phone cam. 
 


 
and... the print being started

 
Almost done printing...

 
The finished main case part (top cover is still not finalized and printed)


 
This is how it sits now... picoPSU and vandal switch installed along with all the wiring. Just need to finalize and print the top cover

 

I wanted a very small PC to control my 3D printer, and i looked around at my spare parts and came up with this. It'll be a small 3d printed case which will house a pico PSU, AMD APU mobo and an SSD.

The case will have only one button on the front for a clean look... a 22mm vandal switch (it will be blue).



Here is the render of the case, I haven't finished the top cover yet. The top cover will include the SSD mounts along with a fan mount.
 
Once i take the final pics i'll use my DSLR instead of this crap phone cam. 
 


 
and... the print being started

 
Almost done printing...

 
The finished main case part (top cover is still not finalized and printed)


 
This is how it sits now... picoPSU and vandal switch installed along with all the wiring. Just need to finalize and print the top cover

 

I wanted a very small PC to control my 3D printer, and i looked around at my spare parts and came up with this. It'll be a small 3d printed case which will house a pico PSU, AMD APU mobo and an SSD.

The case will have only one button on the front for a clean look... a 22mm vandal switch (it will be blue).



Here is the render of the case, I haven't finished the top cover yet. The top cover will include the SSD mounts along with a fan mount.
 
Once i take the final pics i'll use my DSLR instead of this crap phone cam. 
 


 
and... the print being started

 
Almost done printing...

 
The finished main case part (top cover is still not finalized and printed)


 
This is how it sits now... picoPSU and vandal switch installed along with all the wiring. Just need to finalize and print the top cover

 

I wanted a very small PC to control my 3D printer, and i looked around at my spare parts and came up with this. It'll be a small 3d printed case which will house a pico PSU, AMD APU mobo and an SSD.

The case will have only one button on the front for a clean look... a 22mm vandal switch (it will be blue).



Here is the render of the case, I haven't finished the top cover yet. The top cover will include the SSD mounts along with a fan mount.
 
Once i take the final pics i'll use my DSLR instead of this crap phone cam. 
 


 
and... the print being started

 
Almost done printing...

 
The finished main case part (top cover is still not finalized and printed)


 
This is how it sits now... picoPSU and vandal switch installed along with all the wiring. Just need to finalize and print the top cover

 

I think that the guy from rate my setup would suffer the first known case of a fatal orgasm, were he to see this.
 

 

Long time with no update but here's whats new
 
- Upgraded to LGA2011-3
- Added another 290
- Aquero 4 died
- Aquero 6 died (i have really bad luck with these things....)
- CF Wrap front panel got damaged 
 
 
Will post some updated pics soon.
 
 

 

Long time with no update but here's whats new
 
- Upgraded to LGA2011-3
- Added another 290
- Aquero 4 died
- Aquero 6 died (i have really bad luck with these things....)
- CF Wrap front panel got damaged 
 
 
Will post some updated pics soon.
 
 

 

I got them from FrozenCPU. I also saw them on Amazon... they were like $12 each. + shipping

Thanks! Yeah I think the CF goes well with the build. There are a few things inside the case that are now CF also. I will get some pics up soon.

Hey guys, so I figgured why not put up a build page for my work in progress 800D build. 
 
Specs below, I will be replacing the GPU as soon as the new ones come out, with whatever is the next flagship card. 
 
 
 NEW Specs:
Core i7 5930k
MSI X99S SLI
R9 290 Crossfire
16GB DDR4 Crucial
ASus Xonar STX
Crucial m4 x3 - Raid0 756GB
Samsung 120gb SSD (x2)
 
Raid1 WD blue - 1TB
 
Specs:
Core i7 2700k
MSI Z77 Mpower
R9 290 (Will be changed)
16GB Corsair
ASus Xonar STX
LSI MegaRaid Dead
Crucial m4 x2 - Raid0 512GB
Raid1 WD blue - 1TB

Water:
HWLabs GTX360
HWLabs GTX120
XSPC EX240
XSPC RS240
XSPC Raystorm
XSPC Compressions
Koolance QDC
Koolance T Drain
Koolance Fittings
D5 Vario w/ EK TOP
 
 
 
A few shots of the current state of the build. (I have a lot more stuff in the works still...)
 
 
The tubing

Some of the sleeving

 
Carbon Fiber Front Panel


 
The main centerpeice... This will be backlit with LEDs. My friend cut this out with his CNC.

 
A little bit of sleeved wire

 
 
 
And finally, how the build currently sits.


 
There are a few things not pictured. (tinted window, vinyl decals, carbon fiber mid plate, acryllic basement cover, etc) 
More to come...
 
Looking for suggestions on coolant color. I was thinking pastel white. 

Looks great! Can't wait to see the finished build

Sweet case.
I would have suggested a dummy tube going into a portal but it would not look good 'cause wouldn't be as clean.
Have a nice day

Hey guys, so I figgured why not put up a build page for my work in progress 800D build. 
 
Specs below, I will be replacing the GPU as soon as the new ones come out, with whatever is the next flagship card. 
 
 
 NEW Specs:
Core i7 5930k
MSI X99S SLI
R9 290 Crossfire
16GB DDR4 Crucial
ASus Xonar STX
Crucial m4 x3 - Raid0 756GB
Samsung 120gb SSD (x2)
 
Raid1 WD blue - 1TB
 
Specs:
Core i7 2700k
MSI Z77 Mpower
R9 290 (Will be changed)
16GB Corsair
ASus Xonar STX
LSI MegaRaid Dead
Crucial m4 x2 - Raid0 512GB
Raid1 WD blue - 1TB

Water:
HWLabs GTX360
HWLabs GTX120
XSPC EX240
XSPC RS240
XSPC Raystorm
XSPC Compressions
Koolance QDC
Koolance T Drain
Koolance Fittings
D5 Vario w/ EK TOP
 
 
 
A few shots of the current state of the build. (I have a lot more stuff in the works still...)
 
 
The tubing

Some of the sleeving

 
Carbon Fiber Front Panel


 
The main centerpeice... This will be backlit with LEDs. My friend cut this out with his CNC.

 
A little bit of sleeved wire

 
 
 
And finally, how the build currently sits.


 
There are a few things not pictured. (tinted window, vinyl decals, carbon fiber mid plate, acryllic basement cover, etc) 
More to come...
 
Looking for suggestions on coolant color. I was thinking pastel white. 

I approve. That is super sexy.

Damn, UV looks soon nice in PCs. Can't wait to see more pics

Sweet mother of Frith that's awesome.

looks promising  
"Sub that shit!"

Question how did you tame the bounce liquid???