FineVisionz

Wow! I'll have to look more into this one. I'm surprised that they are still making cameras with this older styling.

A camera that kept popping up while doing research was the Panasonic G7. I just wanted to see what other people recommended before I decide on the G7 or not.

Hello, Looking to upgrade from my Canon T3. My budget is around $600. Requirements... 4k video interchangeable lenses At least 16mp photos Decent low light performance Doesn't have to be Canon, open to any brand Thanks! -FineV

Bought a new modem, didn't work. But I've ran the test again and was able to get some results for bufferbloat. http://www.dslreports.com/speedtest/59100446 Sometimes it will give me a grade for bufferbloat, sometimes not. I have low bufferbloat while downloading but much higher when uploading.

Yes, printer is connected via WiFi. I will check for updates and etc. on their website when I get home.

Heres what I know: Printer turned on results in no internet. Printer turned off results in internet. I didn't know what else to share, so I told you what I knew. I'm having an issue so obiviously this isn't something im very knowledgable in. What would you like to know? I'd do my best to help provide you with that information. Thanks

It's an HP ENVY 5055. I just plugged it and connected it. I don't remember setting a static address manually.

If I keep my printer on for any extended amount of time, my internet simply ceases to work. Does anyone have a solution to this other than to turn it off? lol Thanks, FineV

I have Waiting to take my PC to a friends house in the next few weeks and see if I have the same problems with his internet.

I also don't have a "speed" grade. What does this mean? How to I help improve my bufferbloat? Is it a hardware issue on my end. Such as my Modem/Router or possibly my motherboard? Or is it even an issue with my ISP ?

http://www.dslreports.com/speedtest/58873530

Yes

Recently I have been averaging higher ping than usual, 60+ with some really bad ping spikes of up to 150 multiple times a minute causing me to rubber band really bad. Pretty much unplayable. No one else is using the internet. My speeds are 200 down 15 up. I've done packet loss tests through my service provider and they report that there is none. I know this is a bit of a mess. Any tips/help would be appriciated.

What new/used priced VR headset has the best value in your opinion?

Is there any other cheaper alternatives to an RGB fan that can be controlled though icue? I really don't want to spend $100 for 3 Corsair fans.... Expercially because I'll need more than just 3.

FIXED In the iCue software, select your ram from your device list, select "DIMM SETUP", and from here you can select each DIMM and switch the orientation of them left to right by dragging them to the correct ram slot position or the orientation of the lights by selecting the DIMM and hitting the little arrow circle icon underneath the DIMM.

My 2 ram sticks are switched. As in, the software sees the left stick as the right stick and the right stick as the left stick. So whenever I have a side to side lighting effect, it goes from my AIO pump to the far ram stick and then to the middle ram stick. I hope this makes sense, and if not I can draw a diagram that might explain it better. EDIT The lighting effect should go 1-2-3 Not 1-3-2 because it thinks the position of my ram sticks are switched. I hope this clears things up.

I'm using a Asus x470 prime. Speed fan lists absolutely nothing.

SpeedFan doesn't recognize any of my fans. I don't use the bios because I want to slave the certain fans fan speeds to either the GPU or CPU temps.

How do I control fan speeds/curves of fans that are plugged into the motherboard without using the bios? Is it possible to set a fan curve whose temperature is directed by the GPU/CPU temps?

Ok, so I got the AIO installed on my GPU but still can't figure out how to set the AIO fans/pump to be controlled by the GPU temps. Speedfan doesn't recognize any fans in my system. At the moment I have a fan curve that I've set up in the BIOs for the fans hooked up to one header on the motherboard. I'm not sure what/where that temperature on that fan curve is being determined by. (CPU, GPU, random motherboard temp, etc.)

How would you run dual AIO's? I have an AIO cooling my GPU and want to get an AIO to cool my CPU. Some questions I have regarding this is there is only one AIO pump header on my motherboard... How should I hook up two AIO's ?

Awesome! Looks pretty damn sweet. I'd like to do something like this in my case one day! I just wish CAM would read my CPU temps properly It just says 50c all the time.

Is G2Deal a safe legit way to get a cheap windows 10 key? https://www.g2deal.com/windows-10-home-32-64-bit.html?___store=default&acc=39&cy=usd&gclid=Cj0KCQjwyLDpBRCxARIsAEENsrLgA8Orfl-F6a9tnOzIx07enGjMkijZ-aWGZNGXXniFQdM_3LPmtDQaAuIHEALw_wcB

I am looking for a CPU cooler that provides good thermals while being reliable. I will be using the AIO to cool a 3800X. Cooler Master ML360R https://www.amazon.com/Cooler-Master-MLX-D36M-A20PC-R1-MasterLiquid-Independently-Controlled/dp/B07DV29GYN/ref=cm_cr_arp_d_product_top?ie=UTF8 Corsair H115i https://www.newegg.com/p/N82E16835181138?Description=corsair 280mm&cm_re=corsair_280mm-_-35-181-138-_-Product And DEEPCOOL Captain 240 V2 Pro https://www.amazon.com/DEEPCOOL-240-V2-Technology-Waterblock/dp/B07QPNP4VP/ref=sr_1_6?crid=3G3LR3YEQJDYR&keywords=240mm+liquid+cooler&qid=1563143427&s=electronics&sprefix=240mm+%2Celectronics%2C177&sr=1-6