Gavin Gilchrist

somehow fixed it mate cheers anyway

just a quick update i managed to fix it . i flashed a Gainward GTX 770 4gb with almost the exact same clocks and it works ran furmark with no issues dont know how but im not questioning it

thats what i was thinking but would be kinda strange as nothing should be fried as it was undervolting. but then again i dont know thanks for the input tho

Right so. the card im running is a Palit Jetstream GTX 770 4GB and the card runs pretty hot, like way too hot. 90C on furmark the card struggles to even hold boost clock for longer than 5 mins. so i thought that undervolting would be a good option. i started off by getting the bios for my card which i got from here " https://www.techpowerup.com/vgabios/?architecture=&manufacturer=Palit&model=GTX+770&version=&interface=&memType=&memSize=4096&since= " i then used keplar Bios tweaker to lower the voltages. i dropped the voltages for CLK 40 - CLK 52 from a max of 1250mv down to 1237.5 i then used Nvflash to flash the new bios i did this and it ran find it installed and asked me to restart i restarted but wasnt able to load furmark again without it emiditally crashing my PC so from that i learned okay my card is unable to be undervolted i guess it was already as low as it could go as i was still able to get into to windows i tried just flashing the stock bios from from the same site with no ajustments made that didnt fix anything i was still encountering the same issue i tried using the other 3 alternative bios's on the site and none at all work sometimes artifacts would show on post screen sometimes windows boot screen and even the home screen ive tried increasing the voltage through MSI afterburner just to see if furmark would atleast launch but nothing ive tried uninstalling my display drivers using DDU and reinstalling them and still nothing whenever i try load up anything GPU intensive the PC completely locks up and freezes resulting in multiple boot loops. i understand and have learned from this that i should have created a back up and i understood the risks before attempting this im just wondering is this card completely screwed now or is there anything anyone would recommened trying any help at all would be appriciated as ive ran out of ideas now

it took 2 and a half months to get here so im gonna leave that untill i have no other option but thanks anyway

hmmm okay ill take it into concideration ive had atleast twice the amount of USB devices plugged in before in the past but ill still try it anyway just in case

Hello okay so. Less than a week ago i got the Roccat Kone EMP. and within the last 2 days the mouse has been randomly disconnecting and reconnecting the mouse doesnt have to be moveing for it to disconnect i left it still for basiclly the whole day yesterday and it would just randomly cut out and reconnect. somtimes it would reconnect imeditity sometimes it would take up to 7 seconds to reconect i first thought issues might have been driver based so i tried uninstalling and re downloading the drivers did not fix i tried checking the entire cable for bends that cause it to disconnect this made no difference i tried unticking box for the power save option for usb still nothing i tried running troubleshoot option in windows nothing i tried switching the it to a different usb port still nothing somtimes it can take up to 30+ minitues for it discconnet sometimes it will do it 2-3 times in a row im not sure what else i can do so any help would be appricated i dont want to send it back unless i really really need to as its too much hassle

Yeh i can agree i dont need it but the upgrade seemed quite nice even though i didnt even need it, ill just give then back when i see him tomorrow if i have no luck getting it to work

Yeh i know, in so confused with it all ??

i did that set both kits to run at 1600 mhz thats stock for both of them aswell anyway

EXTRA: the system does boot and it shows all ram in taskmangerr and cpux and it can all be utalised it just says error in aida when running for about 1 min

what do u mean?? there both ddr3 if thats what u mean??

i was giving it for free and he said if it does not work i can jsut give it back either way i get free ram or i dont no complaining there like

Hi there i recently got given a 8gb kit (2x4gb) of corsiar vengance from a family member the kit works perfectly fine i know that for sure but when i plug it into my pc im getting some problems when i try run aida64 stress test on my ram i get thie error( warning hardware failure detected test stopped ) i think this is because im running it along side my current 16gb the system worked fine with 2x8gb crucial 1600 mhz but when i add the additional 8 i get the error i have both kits running at 9-9-9-28 in the bios and both set to 1600mhz the voltage is set to auto both the kits work fine by themselfs but not together is there anything i can do to fix this issue or am i just not going to be able to run a 4 sticks

still not stable at 4.7ghz @1.312v and thats maxing out my cooler and temps at 75c so i guess im just not getting it