All Activity

Hi guys I have question, but first here are my specs for my PC: Ryzen 7 5800x, 64gbs ddr4 3600mhz, RTX 4070, Pystar 1000W PS, 360mm NZXT Kraken. For some reason i've been having Idle temps at 60-65 degrees and I just applied new thermal paste too and it still remains at those temps with a 5-15% load. Is this an issue with a BIOS feature or can it do something with the cooler. I cant find the issue and I would love the help or an idea what's the issue. PS- Please excuse the awful cable management IMG_4029.HEIC

The product page makes it pretty clear it's an LED-backlit LCD (IPS-type). LED-backlit monitors have been commonly labeled as "LED monitors" for over a decade.

What about economic home security setup with all products from Amazon.

oh my god, I thought that was a joke What the actual hell

i was able to lower some of the timings with 1.65v

Oh don't worry, it's not an 80s mic. ...It's early 60s. Dynamic range will thusly be even worse. According to datasheets on the capsules, they start to fall off around the 40hz and 2000hz mark, but I fully expect a 10+% deviation from those numbers due to age. I do agree with you though - Didn't realize how dull some of my favorite older recordings sounded until I got a speaker good enough to hear the difference. In a way, the Voice of the Theatre A7 I restored ruined a few tracks for me because I realized it wasn't just my speakers that were the issue. Like when I saved up for a new DLP projector and its video was so clear that it made all my DVDs look like trash.

Budget (including currency): $1000 Country: USA Games, programs or workloads that it will be used for: Light gaming, mostly Factorio, some AAA modern games but not too much. I use a 3440x1440p monitor, so would be nice to be able to play most games at 60fps high settings. Other details: I am currently rocking a Ryzen 7 2700X (8c16t) and a Radeon VII GPU and I am starting to consider upgrading to something more modern. Not sure what the best path would be, thinking of going the 7800X3D route for the CPU, but factoring that and a new motherboard, I am wondering what GPU would be an upgrade to the Radeon VII I currently have without going crazy with something like a 4090. I have an 850W power supply that I would like to keep. I am OK with going used for the GPU as well, just not sure where to start.

I'm really looking into buying a new CPU cooler, specifically the NZXT Kraken Elite preferably 360mm, I know its expensive but I like aesthetics. Now, would it a good idea to buy a used one off eBay or something? I have had an AIO leak on me before and kill my graphics card, but I was refunded. But because it's used and I'm not the original purchaser, should I still buy a used Kraken Elite? I've been eyeing this listing on eBay

How much can you sell your 7600 for? If you can sell it, add 20-30 and buy the 7700K do it, if it's more it's not worth it. A 6700K is s good option too, but I believe those hold the prices too.

Budget (including currency): INR 25000 Country: India Other details https://pcpartpicker.com/list/c3DPTY, I have bought the CPU, GPU, Memory and storage so far. Hello, I need some help with my case selection as you can see from the above parts list, I have a radiator for CPU and a radiator for GPU. The problem I am having with case selection is: - I live in a hot climate where sometimes temperature reaches 40 C. - If I get any off shelf case with say has capacity for 360 top and front supported radiator and mount both those radiators regardless of the position, I would have nothing to cool the memory. - So far I narrowed it down to Corsair 5000D and NZXT H6 flow (just because of the fan placement on corner and damn it looks good). What are your recommendations and if there is any other case that I can choose from, please let me know. Any help is appreciated. P.S. Not all cases you see in US and EU are available in India but most of them are and I need to stay in $250 budget if possible.

Artisan pads? What do Boardzy and Fresh Reviews say?

I asked about the multimeter because I thought your CMOS battery might be going bad, I've seen (and experienced) am4 boards experience such issues when the battery dies. Do check with Hard Disk Sentinel.

It should let you set it to pump or like 80% in the UEFI. Its always possible its not running at a high speed which is preventing proper circulation under low load if its a 3 pin.

What happens if you just use 1 stick of RAM? Same issue? If so, remove it and try the other stick of RAM. If issue still occurs then try it without the USB splitter. Would be good to rule it out since that's the only change you've made.

I would really recommend just getting a new system, ryzen is always affordable and way faster.

Thanks so much

all the drive will be removed and mos likey have to drill and do mouts to suport the mb going off the mb tray... but i dont no what els there other big case but cost more moeny like thrmaltake core 100 /200 corsair obsidian 1000 Thermaltake The Core P6 maybe? Thermaltake Core P8 Thermaltake Core P3 might be able to mount it to this? doont think it will fint in this Thermaltake Tower 900 posably a little devil case? https://www.ldcooling.com/ this is an old pc site and its sketchy but they make big custom case... https://www.mountainmods.com/ anidees AI Crystal XL PRO is another one if you can find it. nothing in Canada... but might stil be some in the us lian li v 3000 plus has a L of 23 inch by 15 inch Raijintek Eris Evo Raijintek Enyo Grand Tour Raijintek has some big case too Cooler Master's HAF 700 Evo but looks tight...

Its a 3 pin connector and I got fan speed app to put the pump on a higher voltage

who said it was half load? I said Idle System Process was the only thing running at 97ish % but that always runs showing how much of your CPU isn't being used

actually thats not gonna work looking at a better diagram that you posted, it would be covering the extra cooling sections without any support, and thats assuming there are no other obstructions in the way there.

Don't, it's an expensive case and you don't want an expensive, unworkable case for your board.

looking at it, i might not be able to use it? i dont know for sure, but it looks like the HDD bays are gonna be in the way, i can order it and see for sure, but im not gonna keep my hopes up with it

might https://www.phanteks.com/assets/manuals/PH-ES620P.pdf

Likely not, you might not just be able to stick that thing right on the mounting holes... you got to realize the ones UNDER the regular ATX holes, are there for an ITX board.

so your thinking this case can house it? https://www.amazon.com/Phanteks-Enthoo-PH-ES620PTG-DBK01-Full-Tower/dp/B0894H2JZ4?th=1