All Activity

I'm fine with this for "drawing" and "animating" AIs.

I need help please read all of this. I have a problem with 2 out of the 4 RAM slots on my motherboard. I have a Gigabyte B550 UD AC motherboard. I'm also using OLOy DDR4 RAM 32GB 2x16GB Blade Aura Sync RGB 3600MHz CL18. If I put 1 stick in A1 and the other in B1 then turn the PC on it will stay on for a few seconds. Then turn off then turn itself back on. But it won't post. Also the same thing happens when I put a stick in A2 and the other in B2. I've also let it set there for over 20 minutes just in case it was doing memory learning or whatever. But it never did anything. Something else none of my other RGB in the case will turn on when all this is going on. Except for the RAMs RGB. Now if I put both sticks of RAM in slot A1 and A2 then turn it on all my RGB turns on it doesn't turn itself off and back on it just starts up and posts with no issue. I know the RAM is getting power because the RGB on the RAM will light up just the PC will not post unless both sticks are in A1 and A2. Someone please tell me anything?

From what I'm able to find the cable should be able to do 32.4 Gbps (which would be HBR3). 1440p, 10 bpc, 240 Hz requires 30.77 Gbps, so the cable should be up for it. Maybe it was defective or the specs are plain wrong, but yeah you'll need a cable that supports HBR3 (cables are not versioned, they are rated by the maximum bandwidth they support, even if the version is often used for marketing purposes)

50 is the way to go if you need quantity.

I'll get the 50, cause I'll be using it for other things too, just wanted to make sure, appreciate the help!

That's typically the kind of games that won't run well on it, but it's $100 for the platform, anything new is $250+, I just say you can't get much better for the price unless you find a real good deal on a 2600X platform or such

Yes, and putting someone in jail is not restricting freedom because they can still walk around in their little jail cell... For those wondering, censorship is defined as: or: Just because you have other ways of communicating something doesn't mean the act of taking options away isn't censorship. By that logic, China isn't censoring anything at all. Them banning certain words on websites? That's not censorship because people can still say those words in their own homes. It's a silly argument to make that shows a lack of understanding of the word. People said the same thing about books, movies, music, and so on.

The microcenter nearby (2ish hours) is the one opening in Charlotte on the 8th of May. Can't check their stock prices yet as they're not live. I think I'll stick with am4 and use the extra funds to get a better monitor. Thank you for the build suggestions.

IDK, I was getting actual slowdown in Elden Ring at launch. Don't think I could recommend chips that old at all.

Write speeds are abysmal. Perhaps try another M.2 slot or just reseat the SSD. As the speeds on random end are slower than HDD would have.

@Robchil okay, done... Anyone else got a few 14900ks or even 14900k they could test?

Hello, I built a new pc at the end of last year. It has an only m.2 ssd crucial p3+ 2to where Windows 11 is installed. Ever since, only when i’m downloading larges files, typically a game (whatever the launcher) but not only (Windows downloading an update, Nvidia downloading a new pilot…), my computer freezes completely during 10 sec from time to time until the download is completed. Really annoying. In the task manager, process tab, disk usage cap at 50%. Won’t exceed 50%. Read somewhere it might be the problem. In performance tab, the disk is at 100% usage. I run CrystalDiskMark, my write speed are pretty low compared to read speed. I have read that it "could be normal after the ssd is half full" (Is that true ?). Currently have 747Go free of 1.81To. I disabled Write-caching policy. Crucial storage executive tells me the ssd is in good health and has the latest update. I force Gen4 on the M2_1 slot (where it is installed). Run chkdsk, sfc scannow on cmd, all good. What can I try to check next ?

i5 2500 in a Dell Optiplex = 100% ewaste, don't buy this, refuse it even for free

Propaganda bs, the US want to ban Tiktok just to piss off China, that does the same thing with Whatsapp and other apps That could come straight out from a Vault Tech rep in the Fallout series Or Militech vs Kuang Tao in Cyberpunk

Yeah, I'll just grab the XMT50 then, lol, thank you. I was just curious cause my BB used to sell Arctic MX4 in store but now only have this Corsair stuff.

Yes, I know how to repaste, I just need some more thermal paste and I need it fast lmao.

I was so happy when I finally saw the AK-340107-100-S from AOC on my local shop (Allegro.pl) appear and did not pay any attention to it's specs, assuming it's gonna be fine, it's 2024 after all, everybody uses high refresh monitors, am I right? But no, it couldn't handle 240Hz @ 1440p in full 10-bit RGB, dammit, it couldn't even handle 120Hz and started resetting my monitor after a few hours of using it! So far my Samsung G7 is very happy set in DisplayPort 1.4 mode (this got me confused with the fiber one) with a DisplayPort 2.0 16K cable from YIWENTEC (DP16K-F0207) and 240Hz in 1440p at full RGB 10-bit range is no problem, but I was just looking around for a fiber one that's around 10m long so I could put my PC behind a wall in the next room. Any finds?

Ok so I’ve decide to go with the hyperx haste wireless

~5C at max lower temps. I had 2-3. Thermalright LGA1700 one.

Those contact frames are god tier.

try posting it to the video creator, he has a few 14900ks.. it's not that old video so you should be able to get a reply.

One year ago, Linux Mint Maybe a versioning issue as it was a 7900XTX that was released 3 months before

It's not really solved, freeze at start isn't good at all...

I have done some testing in ow checking both frametime, 1% lows and 0,1% lows. Framtime went between 3-5 ms throughout the match. 1% lows was fluctuating between 200 and 130. Lowest I saw was 120 0,1% lows was fluctuating between 170 to 100 This was only in team fights So you might be right about this. The next question I have is how do I figure out what is causing this? Thanks for the help Can also record some ingame if thats better

Yeah, of course the loading mechanism and applying technique play a part also. Can't really tell the best technique as even more important is to add enough paste, adding too little has a bad impact on temps, too much and you have a pool of goop around the ihs...