Max Ruscky

Would love the Razer Blade with its nice 1060 as it will be massive help as I am starting a new coding course and it will involve a lot of travel. Thanks to LMG and Razer for this giveaway

From what i gather I dont think fans will make that much of a difference as long as they are from reputable brands and are optimised for static pressure. Since I have some noctuas i might just stick with not sure yet

From what ive seen jayztwocents was having issues with his pastel liquid. I think ill just go with clear ek red coolant. What would you recommend for fans?

Thanks for the help apreciate it. I will definetly post some pics once the build is underway/done

Thanks for the suggestions definetly alot to think about. Fans is another decision i cant make. Im torn between corsair sp120s, vardar f4, or noctua 12 ippc 2000rpm (already have a couple of these) what would you recommend

Oh sorry yea parallel was a wrong word. They will be 2 separate loops a 480 and 140 for the gpus and a 480 for the cpu and mosffets a res and a pump for each loop

Could you please explain what you mean by tests? I thout having 2 laing d5s wouldnt be an issue as far as flow and head preassure goes

I will have 2 loops and planning on having drain ports at lowest points for both

Thats a fantastic ooking build looks like alot of effort went into it. Im gonna run a gpu and a cpu loop in parallel. Phanteks Entho Primo 2 EK EX 480 rads one top one bottom An EK 140 rad for the rear And 2 D5 pumps All Ek blocks All that to cool the mosfets on maximus viii fromula the cpu and 2gpus

I hear you suppose drain and maintain your system every year change the tubes and coolant. I was just wandering how much of hastle it is to re bend the tubes every time from what I read PETG seems the best for ease of use and is a bit tougher. Also is it a good idea to mix tubing, for example having hard tubing where its visible and soft running at behind the case and what not.

Ok i figured it out I appreciate the help thanks. All i did was deleted the array reset bios to default then manually set the raid setting on restarted then ctrl+i set up a new array and it worked all drives were detected and bootable.

Hi, I'm about to start my second watercooled build my first one was about 7 years ago I've since had all air cooled PCs and looking forward to going water cooled. I did quite a bit of research and decided on most of my parts. All EK parts so far as I hear good things. The only thing i cant decide wether to go PETG tubing up front or stick to soft all the way through the loop. Is it alot of hastle or is it no too bad? I upgrade about once a year maybe year and half depending on whats out. My other question was to go with EK-Ekoolant or Mayhems X1 red colour? And primochil tubing or Mayhems tubing? Any suggestions are welcome. Thanks in advance

I cant change the boot priority as none of the drives are picked up as bootable so under the boot heading on the bios there are no drives i can pick

Yes I have an it recognized by the bios but like with the windows drive it is not recognized as bootable