Jump to content

Question about Ethernet.

Codymm03
By Codymm03
in Networking
 Share
Posted

If I ran a cable modem to a network switch and from the switch ran dual Ethernet to my computer would I get better performance or just get to half performance Ethernet ports plugged into my computer.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

well teaming is what it's called and you have to set it up. BUT it's only useful if you are expecting bandwidth high enough to saturate one port (most are 1Gb/s). 

Another limiting factor for file transfer is the hard drives involved if you are on mechanical hard drives. Typically a healthy 7200 RPM hdd can achieve 100-115MB/s bnest case scenarios. (800-920Mb/s)

 

Now, for multi-gig connections or for transferring files between two PC with faster drives, be it SSDs or something, teaming can certainly help, depending on the capabilities of the PCs and the switch 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

unless your internet speed is over 1000Mbps you will get 0 improvement

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If I ran a cable modem to a network switch and from the switch ran dual Ethernet to my computer would I get better performance or just get to half performance Ethernet ports plugged into my computer.

Most modems won't connect directly to a switch. You need a router in between there.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Networking

×