Jump to content


Photo

Can you remove Corsair Vengeance Pro heat spreaders?

vengeance pro corsair heat spreader water cooling overclocking

  • Please log in to reply
16 replies to this topic
terrytek
terrytek

    I think Demi Lovato is hot.

  • Member
  • 7,573 posts
  • LocationYour mom's house, stealing her internet.

Hi there,

 

I was wondering... Can you remove the heat spreaders on a Corsair Vengeance Pro? If so, is it removable like the Dominator Platinum? I was wondering so because i plan to remove them and water cool them. Either that, or can i simply put the RAM waterblock over the heat spreaders?

 

Kudos,

 

terrytek


Stuff

Forum's official Core 2, Seagate, and Windows Vista Fanboy (warning, can go totally hardcore)  #IntelMasterRace #NVidiaMasterRace #SeagateMasterRace #WesternDigitalSuckzBallz And then: Also go join my Roleplay Club at http://linustechtips...the-other-type 

Come hang out here at http://linustechtips...ed-car-thread/


Lays
Lays

    hi

  • Member
  • 8,197 posts
  • LocationOregon, United States

User's Awards

     

I believe you can remove all heatspreaders on ram.unsure tho



terrytek
terrytek

    I think Demi Lovato is hot.

  • Member
  • 7,573 posts
  • LocationYour mom's house, stealing her internet.

Well, just by looking at the picture of a stick of Vengeance Pro, it doesn't show any obvious way to remove the heat spreader. But i am confident there is a way to remove the heat spreaders.


Stuff

Forum's official Core 2, Seagate, and Windows Vista Fanboy (warning, can go totally hardcore)  #IntelMasterRace #NVidiaMasterRace #SeagateMasterRace #WesternDigitalSuckzBallz And then: Also go join my Roleplay Club at http://linustechtips...the-other-type 

Come hang out here at http://linustechtips...ed-car-thread/


Lays
Lays

    hi

  • Member
  • 8,197 posts
  • LocationOregon, United States

User's Awards

     

Well, just by looking at the picture of a stick of Vengeance Pro, it doesn't show any obvious way to remove the heat spreader. But i am confident there is a way to remove the heat spreaders.

 

I think usually there's a few screws somewhere you just take out and bam, or maybe it just sticks on. Idk :o



marto
marto

    LTT Twerk Team

  • Banned
  • 3,797 posts
  • LocationMelbin, Straya

Most ram heatspreaders these days are held on with thermal glue and tension. So if you take your time and use enough force you should be able to pry them off


[Project] Direct Build log- http://linustechtips...ct/#entry592575

Twitter- @MartoLTT


thishanTANTRUM
thishanTANTRUM

    Member

  • Member
  • 740 posts
  • LocationSri Lanka

It's possible but you'll more than likely void your warranty.



terrytek
terrytek

    I think Demi Lovato is hot.

  • Member
  • 7,573 posts
  • LocationYour mom's house, stealing her internet.

are you sure there is no way to pry the heatspreaders without voiding your warranty.


Stuff

Forum's official Core 2, Seagate, and Windows Vista Fanboy (warning, can go totally hardcore)  #IntelMasterRace #NVidiaMasterRace #SeagateMasterRace #WesternDigitalSuckzBallz And then: Also go join my Roleplay Club at http://linustechtips...the-other-type 

Come hang out here at http://linustechtips...ed-car-thread/


Blade of Grass
Blade of Grass

    Networking, photography, what else?

  • Moderator
  • 4,141 posts
  • LocationOntario, Canada

Why not just buy the memory without heat spreaders?


Serenity: Intel 4960x | ASUS X79-E WS | ASUS DCUII 770 | Corsair 750D || Blade Server: Intel 3570k | GD65 | Corsair C70 | 13TB

Linus Tech Tips Conglomerate Custom Signature Generator | What Drive Should You Get?

Have a question? Please, don't hesitate to ask me over PM or on Twitter @Bladeof_Grass


terrytek
terrytek

    I think Demi Lovato is hot.

  • Member
  • 7,573 posts
  • LocationYour mom's house, stealing her internet.

where can i buy the vengeance pro without heat spreaders?


Stuff

Forum's official Core 2, Seagate, and Windows Vista Fanboy (warning, can go totally hardcore)  #IntelMasterRace #NVidiaMasterRace #SeagateMasterRace #WesternDigitalSuckzBallz And then: Also go join my Roleplay Club at http://linustechtips...the-other-type 

Come hang out here at http://linustechtips...ed-car-thread/


Leonard
Leonard

    #bringbackourgirlsdamnit!

  • Member
  • 3,113 posts
  • LocationCaribbean

Use a heat gun to loosen the thermal adhesive and use some plastic tool to pry them off, i am sure it can be done but why would you they look good.


P630 | P8Z77-V PRO | i5 [email protected] | EVGA 760 4GB FTW CM Extreme Power Plus - 600W | 2x Seagate Barracuda 1 TB HDD | Patriot Viper 3 Series DDR3 16GB 2000 MHz | XSPC Rs360 Kit | CM Storm QuickFire TK | Corsair M90 | AOC E2251SWDN | Canon PIXMA MG5320 | Windows 7 Ultimate 64bit 


terrytek
terrytek

    I think Demi Lovato is hot.

  • Member
  • 7,573 posts
  • LocationYour mom's house, stealing her internet.
I wantmto water cool them.

Stuff

Forum's official Core 2, Seagate, and Windows Vista Fanboy (warning, can go totally hardcore)  #IntelMasterRace #NVidiaMasterRace #SeagateMasterRace #WesternDigitalSuckzBallz And then: Also go join my Roleplay Club at http://linustechtips...the-other-type 

Come hang out here at http://linustechtips...ed-car-thread/


nelodiavolo
nelodiavolo

    Member

  • Member
  • 119 posts

Might want to check with Corsair if you can remove the speaders without voiding the warranty. 

 

http://forum.corsair...splay.php?f=201

 

They don't sell the Ven Pros without heatspreaders so your only option would be to remove them and take a chance. Is the watercooling for looks? Cause I can't see getting much more performance with watercooling RAM.

 

Good luck though!


Asus Gryphon w/Thermal Armor / Intel i5 4670K / Corsair Vengeance Pro 8GB / Asus ROG Matrix 7970 Platinum / Samsung 830 / Seagate Barracuda
Corsair AX860 / Corsiar 350D / Corsair H100i / Windows 8 Pro

terrytek
terrytek

    I think Demi Lovato is hot.

  • Member
  • 7,573 posts
  • LocationYour mom's house, stealing her internet.

Yeah it's for good looks and maybe some extra performance.

 

And thanks, maybe i will have to switch back to Dominator Platinums, my original decision, since i can just remove the heatspreaders with an allen key.


Stuff

Forum's official Core 2, Seagate, and Windows Vista Fanboy (warning, can go totally hardcore)  #IntelMasterRace #NVidiaMasterRace #SeagateMasterRace #WesternDigitalSuckzBallz And then: Also go join my Roleplay Club at http://linustechtips...the-other-type 

Come hang out here at http://linustechtips...ed-car-thread/


Air tree
Air tree

    The artist

  • Member
  • 1,664 posts
  • LocationJupiter. (Pretty good internet up here!)

Yeah it's for good looks and maybe some extra performance.

 

And thanks, maybe i will have to switch back to Dominator Platinums, my original decision, since i can just remove the heatspreaders with an allen key.

Maybe it's just me but does vengance and dominator ram even look good without the heatspreaders? i thought that was the whole point of it's look, there is better performing ram if that's what your after.



terrytek
terrytek

    I think Demi Lovato is hot.

  • Member
  • 7,573 posts
  • LocationYour mom's house, stealing her internet.

Well, can i put a water block over the heatspreaders without removing them? If so, i can keep the cool look of the heatspreaders without voiding my warranty and also water cooling them.


Stuff

Forum's official Core 2, Seagate, and Windows Vista Fanboy (warning, can go totally hardcore)  #IntelMasterRace #NVidiaMasterRace #SeagateMasterRace #WesternDigitalSuckzBallz And then: Also go join my Roleplay Club at http://linustechtips...the-other-type 

Come hang out here at http://linustechtips...ed-car-thread/


dizmo
dizmo

    Veteran

  • Member
  • 6,971 posts
  • LocationVancouver

Hi there,

 

I was wondering... Can you remove the heat spreaders on a Corsair Vengeance Pro? If so, is it removable like the Dominator Platinum? I was wondering so because i plan to remove them and water cool them. Either that, or can i simply put the RAM waterblock over the heat spreaders?

 

Kudos,

 

terrytek

 

Sorry to revive an old thread, but did you ever find out if this was possible?



Excon
Excon

    Canada, eh?

  • Member
  • 5,239 posts
  • LocationOntario, Canada

I tried to do it once and I ended up ripping a memory chip right off.


i7 4790k | Asus Z97 Maximus VII Hero | 16Gb Dominator Platinum 2133mhz | Gigabyte Windforce 970 1563/1928

H100i w/ Swiftech Helix fans | Evga G2 850w | 6x SSDs | 6x Seagate Barracudas

Fractal Define R4 Titanium| HD558 w/ Fiio E10 | AT2020 | G710+ | Logitech G700s |  DP2710 Asus PA248Q






Also tagged with one or more of these keywords: vengeance pro, corsair, heat spreader, water cooling, overclocking

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users