Project Red 0DB

[ningjia416]

80% done, still need fan and led to setup properly.

 

 

 

 

 

The Temps are Valley Benchmark for 1 hour. 

 

 

My Part list, excluding Water Cooling components 

http://ca.pcpartpicker.com/p/TZk9ZL

 

July 1 Canada Day LED Update

 

[Dabasepc]

remove the front HDD Cage.

[ningjia416]

remove the front HDD Cage.

Where do i mount the hard drive?

[ningjia416]

Where do i mount the hard drive?

Found the solution 

http://www.newegg.ca/Product/Product.aspx?Item=0VE-000W-00007&cm_re=ORICO-_-0VE-000W-00007-_-Product 

[airdeano]

looks good, but one thing to ponder:

 

i'd relocate the tube from the top-right of GPU terminal block (drain?) to the

lower radiator on a 90° and a ball valve. the air present allows the pressure at

that point "compress" and make for uneven pressurization within the loop.

 

also drain port should be lowest point to allow a majority of coolant to be

removed without spillage.

[Dabasepc]

Found the solution 

http://www.newegg.ca/Product/Product.aspx?Item=0VE-000W-00007&cm_re=ORICO-_-0VE-000W-00007-_-Product 

 

 you got it. +1

 

I did the same.

[ningjia416]

looks good, but one thing to ponder:

 

i'd relocate the tube from the top-right of GPU terminal block (drain?) to the

lower radiator on a 90° and a ball valve. the air present allows the pressure at

that point "compress" and make for uneven pressurization within the loop.

 

also drain port should be lowest point to allow a majority of coolant to be

removed without spillage.

I know, the problem is the bottom xspc block dont like the ek compression fitting. The threads on the bottom port is all no good except one. So i had to put the drain on the top block. 

[ningjia416]

Just Updated with new LED Pics

[ProjectRED]

I just have to say good build name.

[ningjia416]

Just removed the Hard drive cage. Sorry for the bad images. 

[ningjia416]

RBG FTW!!!

[Maverick5500]

what leds did you use?

[ningjia416]

what leds did you use?

I use the 5050 RGB LED, Its cheap on ebay. you can also buy those from Homedepot (Canada/USA) but it 2-3 times the price. 

 

http://www.ebay.ca/sch/i.html?_from=R40&_trksid=p2050601.m570.l1311.R4.TR12.TRC2.A0.H0.X5050+rgb.TRS0&_nkw=5050+rgb+led+strip&_sacat=0

 

http://www.homedepot.ca/product/118-inches-3m-rgb-led-flextape-with-plug-in-dirver-remote-and-controller/844236

[Maverick5500]

I use the 5050 RGB LED, Its cheap on ebay. you can also buy those from Homedepot (Canada/USA) but it 2-3 times the price. 

 

http://www.ebay.ca/sch/i.html?_from=R40&_trksid=p2050601.m570.l1311.R4.TR12.TRC2.A0.H0.X5050+rgb.TRS0&_nkw=5050+rgb+led+strip&_sacat=0

 

http://www.homedepot.ca/product/118-inches-3m-rgb-led-flextape-with-plug-in-dirver-remote-and-controller/844236

 

 

thanks but im in australia and its $50 for a 44 key controller, 5 meters of 5050 leds and power. not to to bad