Jump to content

PC turns on, all fans are spinning, no signal to Monitor

StreetcarTrixx
By StreetcarTrixx
in Troubleshooting
 Share
Posted

I just finished installing i5 into my MSI Z97S motherboard and everything fit. I plug the PC in, and turn it on, all fans spin, computer has power, 

 

but my monitor gives me this error: "There is no signal coming from the computer."

 

Is my brand new mobo a doa??

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Might be a DOA.

Do you have a graphics card installed?

Try to reseat the cpu (taking the cpu out of the motherboard and placing it back)

Also, try to boot the pc with only 1 stick of ram.

If you want my attention, quote meh! D: or just stick an @samcool55 in your post :3

Spying on everyone to fight against terrorism is like shooting a mosquito with a cannon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I just finished installing i5 into my MSI Z97S motherboard and everything fit. I plug the PC in, and turn it on, all fans spin, computer has power, 

 

but my monitor gives me this error: "There is no signal coming from the computer."

 

Is my brand new mobo a doa??

All the cables plugged in? GPU cable CPU/Mobo?

 

EDIT: Check the ram as well. 

 

EDIT 2: Are you using a GPU? make sure the dvi/hdmi is plugged into the GPU not the Motherboard.

CPU: AMD Ryzen 5 5600X | CPU Cooler: Stock AMD Cooler | Motherboard: Asus ROG STRIX B550-F GAMING (WI-FI) | RAM: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 CL16 | GPU: Nvidia GTX 1060 6GB Zotac Mini | Case: K280 Case | PSU: Cooler Master B600 Power supply | SSD: 1TB  | HDDs: 1x 250GB & 1x 1TB WD Blue | Monitors: 24" Acer S240HLBID + 24" Samsung  | OS: Win 10 Pro

 

Audio: Behringer Q802USB Xenyx 8 Input Mixer |  U-PHORIA UMC204HD | Behringer XM8500 Dynamic Cardioid Vocal Microphone | Sound Blaster Audigy Fx PCI-E card.

 

Home Lab:  Lenovo ThinkCenter M82 ESXi 6.7 | Lenovo M93 Tiny Exchange 2019 | TP-LINK TL-SG1024D 24-Port Gigabit | Cisco ASA 5506 firewall  | Cisco Catalyst 3750 Gigabit Switch | Cisco 2960C-LL | HP MicroServer G8 NAS | Custom built SCCM Server.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'd hope not.

 

What's the rig's full specs? If you have a graphics card plugged in you'll need to use that as your output.

Otherwise, is your screen set to the right input?

Sig under construction.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

The entire rig's specs include the i5 4590, a Msi Z97S Krait motherboard, 16gb of g.skill ripjaws at 1600mhz, two hard drives and a GTX 960 FTW+

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

The entire rig's specs include the i5 4590, a Msi Z97S Krait motherboard, 16gb of g.skill ripjaws at 1600mhz, two hard drives and a GTX 960 FTW+

Are the fans spinning on the 960? I'm assuming you've connected the right power connectors.

I've once made the mistake of not plugging in the CPU power connector properly and not booting because of that.

Sig under construction.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Are the fans spinning on the 960? I'm assuming you've connected the right power connectors.

I've once made the mistake of not plugging in the CPU power connector properly and not booting because of that.

Yes they are spinning. When I press the power switch, all fans turn on, CPU fan, GPU fans, even case fans. But no display to monitor

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Try uninstalling the 960 and use the iGPU

00110000 00110001 00110000 00110000 00110000 00110000 00110001 00110000 00100000 00110000 00110001 00110001 00110000 00110001 00110001 00110001 00110001 00100000 00110000 00110001 00110001 00110001 00110000 00110000 00110001 00110000 00100000 00110000 00110001 00110001 00110000 00110000 00110001 00110000 00110000 00100000 00110000 00110001 00110001 00110000 00110000 00110001 00110000 00110001 00100000 00110000 00110001 00110001 00110000 00110001 00110001 00110000 00110001 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Try uninstalling the 960 and use the iGPU

 

Same thing. No power to the monitor. PC powers up fine though

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Same thing. No power to the monitor. PC powers up fine though

Did you test the monitor?

00110000 00110001 00110000 00110000 00110000 00110000 00110001 00110000 00100000 00110000 00110001 00110001 00110000 00110001 00110001 00110001 00110001 00100000 00110000 00110001 00110001 00110001 00110000 00110000 00110001 00110000 00100000 00110000 00110001 00110001 00110000 00110000 00110001 00110000 00110000 00100000 00110000 00110001 00110001 00110000 00110000 00110001 00110000 00110001 00100000 00110000 00110001 00110001 00110000 00110001 00110001 00110000 00110001 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Did you test the monitor?

 

Yes monitor cables are all fine as well

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Hmm

00110000 00110001 00110000 00110000 00110000 00110000 00110001 00110000 00100000 00110000 00110001 00110001 00110000 00110001 00110001 00110001 00110001 00100000 00110000 00110001 00110001 00110001 00110000 00110000 00110001 00110000 00100000 00110000 00110001 00110001 00110000 00110000 00110001 00110000 00110000 00100000 00110000 00110001 00110001 00110000 00110000 00110001 00110000 00110001 00100000 00110000 00110001 00110001 00110000 00110001 00110001 00110000 00110001 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

did u have put the 4pin Cable to your motherboard double chek it , if yes are  u able to shutdown the pc from the start button after all fans are runing ? - if not ur motherboard is dead

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

did u have put the 4pin Cable to your motherboard double chek it , if yes are  u able to shutdown the pc from the start button after all fans are runing ? - if not ur motherboard is dead

 

SOrry for late responce, but this motherboard takes two 4 pins for atx power I thought...? And yes I can shut the pc down when the fans are spinning

 

It turns on but gives me the error: There is no signal coming from your computer.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

SOrry for late responce, but this motherboard takes two 4 pins for atx power I thought...? And yes I can shut the pc down when the fans are spinning

 

It turns on but gives me the error: There is no signal coming from your computer.

 

did u try unpluging the cables form the gpu and plug in again and can u chek that card on other mb to make sure it is working correct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

SOrry for late responce, but this motherboard takes two 4 pins for atx power I thought...? And yes I can shut the pc down when the fans are spinning

 

It turns on but gives me the error: There is no signal coming from your computer.

I'm fairly sure that It is that motherboard, UNLESS you have an incompatible CPU/RAM or didn't install one properly

The Vinyl Decal guy.

Celestial-Uprising  A Work In-Progress

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×