GPU stuck at 0%

[virtualTune]

So for some reason my gpu doesn't fold but it is still under 100% load. Here is the log:

19:03:54:WU02:FS00:0x18:*********************** Log Started 2015-01-24T19:03:54Z ***********************19:03:54:WU02:FS00:0x18:Project: 9111 (Run 6, Clone 1, Gen 48)19:03:54:WU02:FS00:0x18:Unit: 0x000000380a3b1e805473855217afd78e19:03:54:WU02:FS00:0x18:CPU: 0x0000000000000000000000000000000019:03:54:WU02:FS00:0x18:Machine: 019:03:54:WU02:FS00:0x18:Digital signatures verified19:03:54:WU02:FS00:0x18:Folding@home GPU core1819:03:54:WU02:FS00:0x18:Version 0.0.319:04:19:WU02:FS00:0x18:Completed 0 out of 2500000 steps (0%)19:04:19:WU02:FS00:0x18:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 90019:14:32:WU02:FS00:0x18:WARNING:Console control signal 1 on PID 463619:14:32:WU02:FS00:0x18:Exiting, please wait. . .19:14:33:WU02:FS00:0x18:Lost lifeline PID 8756, exiting19:14:33:WU02:FS00:0x18:ERROR:103: Lost client lifeline19:14:33:WU02:FS00:0x18:Folding@home Core Shutdown: CLIENT_DIED19:14:34:WU02:FS00:FahCore returned: INTERRUPTED (102 = 0x66)01:42:34:WU02:FS00:0x18:*********************** Log Started 2015-01-25T01:42:34Z ***********************01:42:34:WU02:FS00:0x18:Project: 9111 (Run 6, Clone 1, Gen 48)01:42:34:WU02:FS00:0x18:Unit: 0x000000380a3b1e805473855217afd78e01:42:34:WU02:FS00:0x18:CPU: 0x0000000000000000000000000000000001:42:34:WU02:FS00:0x18:Machine: 001:42:34:WU02:FS00:0x18:Digital signatures verified01:42:34:WU02:FS00:0x18:Folding@home GPU core1801:42:34:WU02:FS00:0x18:Version 0.0.301:42:55:WU02:FS00:0x18:Completed 0 out of 2500000 steps (0%)01:42:55:WU02:FS00:0x18:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 90001:43:12:WU02:FS00:0x18:WARNING:Console control signal 1 on PID 810801:43:12:WU02:FS00:0x18:Exiting, please wait. . .01:43:13:WU02:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

What am I missing? 

[Sonefiler]

Try undoing any overclocks (including factory overclocks)

[Extingquish]

To me it looks like the slot is just paused

 

Try updating your drivers / going back a version

[Midnight]

What does it mean by "temperature control disabled"?

[Extingquish]

What does it mean by "temperature control disabled"?

As far as I know, it just shuts off the card if it gets too hot

[Kazuki]

Make sure that filthy card functions as designed by placing it into another powered motherboard. 

[virtualTune]

Problem Solved. new problem arisen though -.-

Since I am now in sli, my computer nearly freezes whenever I am folding. It takes about a minute for a mouse input to be displayed. It used to be that I could work just fine while folding. What happened? 

Also I now have 3 Slots but 4 WUs

 

 

[ErickS89]

Can you fold out of SLI? Can you test each card individually? 1 card may be faulty.

[tobben]

Try finishing up the current wu as it is only a few percent, if that doesn't work or if it downloads a new one.

Delete the work located in the work folder within the folding directory and restart the client.

[Xsilent(X)]

just try to reboot first then see Wat happens.

 

Edit just saw it try to update client! seems like you have the older one first deinstall that with the data. then reboot.