Need opinion on my next High-End watercooled build
Thanx. I was planning to use this tubing though http://www.frozencpu.com/products/20516/ex-tub-1856/primochilll_12_OD_ri#blank
If there's a 1/4" version of that tubing that ive missed ,then thank you so much for finding these for me. If not then are there 1/2" versions of those fittings? That's the things i couldn't find
These are the fittings you'll use for the tubing you linked to http://www.frozencpu.com/cat/l3/g30/c703/s2021/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12_OD_Rigid_Fitting-Page1.html?o=title_az
If you wanted to use Bitspower fittings you'll wanna use this tubing:
I actually just found the angled fittings for acrylic tubing. No clue why I didn't see them before but I'm not seeing them for the 1/2" tubing.
12mm 30 degree fittings: http://www.frozencpu.com/cat/l3/g30/c703/s2260/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Fitting_30-Page1.html
12mm 45 degree fittings: http://www.frozencpu.com/cat/l3/g30/c703/s2261/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Fitting_45-Page1.html
12mm 60 degree fittings: http://www.frozencpu.com/cat/l3/g30/c703/s2268/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Fitting_60-Page1.html
12mm 90 degree fittings: http://www.frozencpu.com/cat/l3/g30/c703/s2262/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Fitting_90-Page1.html
So it appears that you'll need to use 12mm acrylic tubing if you want the angled fittings. Otherwise, you'll need to use the adapters I previously mentioned with the fitting for your size tubing. So if you wanted to save some money might be a better choice to go with the smaller tubing.
Also, you can use these to avoid needing to bend the tubing:
12mm 30 degree coupler: http://www.frozencpu.com/cat/l3/g30/c703/s2264/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Coupler_30-Page1.html
12mm 45 degree coupler: http://www.frozencpu.com/cat/l3/g30/c703/s2267/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Coupler_45-Page1.html
12mm 60 degree coupler: http://www.frozencpu.com/cat/l3/g30/c703/s2265/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Coupler_60-Page1.html
12mm 90 degree coupler: http://www.frozencpu.com/cat/l3/g30/c703/s2266/list/p1/Liquid_Cooling-Rigid_Acrylic_-_Fittings-12mm_Rigid_Coupler_90-Page1.html
Those will allow you to have a fitting mid run where you'd normally have to do a bend. As you can see, 12mm is currently where all the fittings seem to be. Hope that helped you out!
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now