Jump to content

Help With PC turning on and off over and over.....

JD52191
Go to solution Solved by JD52191,

So this morning i uninstall everything and connected on thing at a time, and my pc is up and running now, might have been that the psu was not receiving enough air but now that i put it back in its usual place its working fine, so thanks to any and all who tried to help......  

Hello this is my first post anywhere, so apologies for any errors. The problem i have is as follows, today i replaced some fans or may i say all the fans in my pc, and installed noctua fans , 2 for my coarsair h100i, and 4 for case ventilation, also got the nzxt rgb hue, and some individually sleeved cables. when i finished and hit the power button my pc turns on then off and does this continuously, however when i unplug the 8 pin power connector from MBO the pc turns on but there's no video signal, any suggestions would be appreciated. My setup is as follows:

MBO: ASUS MAXIMUS VI HERO

CPU: INTEL I5 4670K

CPU COOLER: COARSAIR H100I

RAM: COARSAIR VENGEANCE LP (2x4gb)

PSU: COARSAIR CX750M

GPU: EVGA GTX 770 SC 2GB

SSD: SAMSUNG EVO 820 1T

OS: WINDOWS 8.1 

 FANS: NOCTUA NF-S12A x4

            NOCTUA  NF-F12 x2

Link to comment
Share on other sites

Link to post
Share on other sites

Have you sleeved the cables yourself? Can be pins in wrong places.

System 1: Thermaltake Element Q - Thermaltake 220W SFX - Asus AT5IONT-I mini-ITX - Intel® Atom™ D525 onboard 1.8GHz Dual-Core HT - Integrated NVIDIA® ION™ - 2x 2GB Kingston DDR3 - Samsung 120GB 840 Series - Scythe Kama Rack 3.5 - Asus DVD-RW

System 2: Thermaltake Element Q - Thermaltake 220W SFX - Asus E2KM1I-DELUXE mini-ITX - AMD E2-2000 onboard 1.75GHz Dual-Core - Integrated AMD® Radeon HD 7340 - 2x 4GB Kingston DDR3 - Samsung 120GB 840 Series - Scythe Kama Rack 3.5 - Asus DVD-RW

Building: Bitfenix Prodigy Black - Corsair AX860i - Asus Maximus VII Impact - Corsair Hydro Series H100i - Intel® Core™ i7 4790K - Asus Matrix Platinum GTX 980 4GB - Corsair 16GB Dominator Platinum 2x 8GB DDR3 2400MHz CL10 - Samsung 1TB EVO 840 Series

Link to comment
Share on other sites

Link to post
Share on other sites

You may have a defective PSU. I suggest trying the power supply in a different unit if that doesn't work then RMA it. 

[CPU] i7 4790K OC [CPU Cooler] H100i [GPU] Evga GTX 980 SuperClocked [Ram] Corsair Vengeance 16 GB 1866 mhz [PSU] Cooler Master 1000w Silent Pro [storage] 256 GB Samsung 840 Pro, 1TB Seagate SSHD, 1 TB WD Blue 4 TB Seagate Nas. [Motherboard] Msi Z97 Gaming 5 [Case] Phantom 410 Red [sound] Onboard ALC 1150 [Headphones] Sennheiser HD 558 [Keyboard] Razer BlackWidow Chroma  [Mouse] Razer Deathadder Chroma [Mouse] Razer FireFly [Monitor] Asus MG278Q

Link to comment
Share on other sites

Link to post
Share on other sites

Have you sleeved the cables yourself? Can be pins in wrong places.

No i bought them, but i removed them and used the stock cables, but it does the same thing.

Link to comment
Share on other sites

Link to post
Share on other sites

You may have a defective PSU. I suggest trying the power supply in a different unit if that doesn't work then RMA it. 

i hope that i don't just had it replaced once, like in June or July, built my pc this march.

Link to comment
Share on other sites

Link to post
Share on other sites

So this morning i uninstall everything and connected on thing at a time, and my pc is up and running now, might have been that the psu was not receiving enough air but now that i put it back in its usual place its working fine, so thanks to any and all who tried to help......  

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×