Jump to content

how will be nzxt S340 for airflow, heat and noise?

hii....i'm planning to change my case..probably nzxt S340...was wondering how will be the airflow, heat and the noise level inside this case....thanks

Link to comment
Share on other sites

Link to post
Share on other sites

Depends on the hardware, quiet fans make a quiet case not the other way around.

 

Airflow is decent, better than the H440.

INTEL CORE i5-7600K | ASUS ROG STRIX B250i GAMING | CRUCIAL BALLISTIX SPORT LT 16GB | EVGA GTX 970 SC | EVGA B3 550W
SAMSUNG 850 EVO 250GB | CRYORIG M9i | BE QUIET! PURE WINGS 2| FRACTAL DESIGN DEFINE NANO S

Link to comment
Share on other sites

Link to post
Share on other sites

Depends on the hardware, quiet fans make a quiet case not the other way around.

 

Airflow is decent, better than the H440.

i really wanted the H440....but the airflow is very restricted.....

what do u about the windowed side panel....is too bad for minor scratches?

Link to comment
Share on other sites

Link to post
Share on other sites

i really wanted the H440....but the airflow is very restricted.....

what do u about the windowed side panel....is too bad for minor scratches?

Airflow is actually really good in the S340, since the fans are a lot less restricted compared to the H440.

 

The windowed side panel isn't that easily scratchable. If you don't abuse your cases it will be perfectly fine. You'll worry more about the piano black finish, so I'd get the white one

"Rawr XD"

Link to comment
Share on other sites

Link to post
Share on other sites

Airflow is actually really good in the S340, since the fans are a lot less restricted compared to the H440.

 

The windowed side panel isn't that easily scratchable. If you don't abuse your cases it will be perfectly fine. You'll worry more about the piano black finish, so I'd get the white one

hmm...thanks a lot

Link to comment
Share on other sites

Link to post
Share on other sites

hmm...thanks a lot

Actually the side panel window scratches without hesitation with from what I've heard from HardwareCanucks. Dimitri ran his dull nail over the window and it scratched very easily.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QuAIwAA&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D9cNWOgbEXMI&ei=Wa1yVJLTC6z2iQL3-oGACg&usg=AFQjCNE2dRhIAkbpUpSNW8q7CjEglc_wrg&sig2=l2GsckqCGmpmrgG5FMwXUA&bvm=bv.80185997,d.cGE

|PSU Tier List /80 Plus Efficiency| PSU stuff if you need it. 

My system: PCPartPicker || For Corsair support tag @Corsair Josephor @Corsair Nick || My 5MT Legacy GT Wagon ||

Link to comment
Share on other sites

Link to post
Share on other sites

Actually the side panel window scratches without hesitation with from what I've heard from HardwareCanucks. Dimitri ran his dull nail over the window and it scratched very easily.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QuAIwAA&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D9cNWOgbEXMI&ei=Wa1yVJLTC6z2iQL3-oGACg&usg=AFQjCNE2dRhIAkbpUpSNW8q7CjEglc_wrg&sig2=l2GsckqCGmpmrgG5FMwXUA&bvm=bv.80185997,d.cGE

yeah...i saw his review couple of times...but the thing is that i'm not gonna start drawing on my beautiful case...i guess nobody will do that too

Link to comment
Share on other sites

Link to post
Share on other sites

yeah...i saw his review couple of times...but the thing is that i'm not gonna start drawing on my beautiful case...i guess nobody will do that too

I'd store the side panel on carpet or something the like so it doesn't get all scratched up. If a dull nail can scratch that panel, I don't doubt that a floor or maybe slightly misplaced GPU couldn't.

|PSU Tier List /80 Plus Efficiency| PSU stuff if you need it. 

My system: PCPartPicker || For Corsair support tag @Corsair Josephor @Corsair Nick || My 5MT Legacy GT Wagon ||

Link to comment
Share on other sites

Link to post
Share on other sites

I have this case, but havent built in it yet.. but from looking at it, the airflow should be good thanks to the large caps in front on the top and bottom to pull air in easily.

Noise will be dependent on the fans you have because their is no sound proofing in the case

which is same for the heat..

 

It is a very solid, well made case. Great to let you inner artist go to town on.

 

Only real complaint I can say is the the worst filter ever made is over the PSU intake..but think that can be easily replaced which I might do myself..

 

The window yeah doesnt seem the be the best but I already planning replacing mine with something stronger and with some engraving on it..

@syrazpc - for all my rambles about PC's -- My Gallifreyan Build In Progress

 

Link to comment
Share on other sites

Link to post
Share on other sites

I have this case, but havent built in it yet.. but from looking at it, the airflow should be good thanks to the large caps in front on the top and bottom to pull air in easily.

Noise will be dependent on the fans you have because their is no sound proofing in the case

which is same for the heat..

 

It is a very solid, well made case. Great to let you inner artist go to town on.

 

Only real complaint I can say is the the worst filter ever made is over the PSU intake..but think that can be easily replaced which I might do myself..

 

The window yeah doesnt seem the be the best but I already planning replacing mine with something stronger and with some engraving on it..

hey is the window transparent?  from where do u get a power supply filter?

Link to comment
Share on other sites

Link to post
Share on other sites

hey is the window transparent?  from where do u get a power supply filter?

 

Still looking for a local place to do the work on the window, but for filter just going to get a standard filter from demcifilter

@syrazpc - for all my rambles about PC's -- My Gallifreyan Build In Progress

 

Link to comment
Share on other sites

Link to post
Share on other sites

hey is the window transparent?  from where do u get a power supply filter?

PSU filter is something you'd have to make yourself unless you want the cheap one it comes with.

And the window is transparent (completely see-through with no blur/grey).

|PSU Tier List /80 Plus Efficiency| PSU stuff if you need it. 

My system: PCPartPicker || For Corsair support tag @Corsair Josephor @Corsair Nick || My 5MT Legacy GT Wagon ||

Link to comment
Share on other sites

Link to post
Share on other sites

PSU filter is something you'd have to make yourself unless you want the cheap one it comes with.

And the window is transparent (completely see-through with no blur/grey).

cool...thanks !!!

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×