Jump to content

Sony UDA-1?

Prokart2000
By Prokart2000
in Audio
 Share
Posted

Hi 

 

I was looking at this amp as it seems ok and has a pc usb input, but can it power two studio monitors and a sub?

If so how would i connect it up

I dont have much experience with audio and amps so any other suggestions or tips would be great!

thanks guys

EDIT:I dont want a fireball in my room so plz help me if it wont work

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

no one! plz!!

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

come on PLEASE!

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

http://store.sony.com/usb-dac-system-for-pc-audio-zid27-UDA1//cat-27-catid-All-Res-Audio

 

Not sure about the sub, but it should power the speakers appropriately...

 

I haven't seen one of these in the local Sony stores that I've been to....

 

Try checking out stuff from Pioneer as an alternative... I don't think that they come cheap, though...

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

http://store.sony.com/usb-dac-system-for-pc-audio-zid27-UDA1//cat-27-catid-All-Res-Audio

 

Not sure about the sub, but it should power the speakers appropriately...

 

I haven't seen one of these in the local Sony stores that I've been to....

 

Try checking out stuff from Pioneer as an alternative... I don't think that they come cheap, though...

thanks for a reply, do you know one that i can put on my pc for input and output to speakers and a sub?

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

thanks for a reply, do you know one that i can put on my pc for input and output to speakers and a sub?

 

Not really... I was thinking of suggesting a dac and a receiver unit/ speaker amp instead...

 

I'm not updated in this field since I still work with analog component systems from more than a decade ago...

 

Sorry, if I wasn't of much help...

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@MayflowerElectronics do you know of a setup where the unput is from my pc and output is speakers and a sub

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@MayflowerElectronics do you know of a setup where the unput is from my pc and output is speakers and a sub

any ideas?

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Look for something with 2.1 support...

 

iirc monitoring speakers sound good enough even without a sub... Or at least that's what I remember when I saw a Panasonic DJ station showcase at one of the local shops...

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Look for something with 2.1 support...

 

iirc monitoring speakers sound good enough even without a sub... Or at least that's what I remember when I saw a Panasonic DJ station showcase at one of the local shops...

i know they sound ok but i want more oomph

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Audio

×