Jump to content

Full water loop for 4770k+R9 290

So, long story short I broke my previous implementation - Kuhler 620 for GPU.

 

I just got my R9 290 in today, and I got a crazy ass idea, maybe I should water block it.... I have a CM 240l cooling my CPU and it does a damn fine job, and its expandable... I could get a GPU block and really do this the right way.

 

Would I NEED another radiator? Personally I figure I probably do, but does anyone know if its is required? I don't want my fans to be too loud, so to keep the RPM's down I figure I probably need more surface area than the dual 120 of the 240l. I could add another 120, to make a total of 3x120 to cool a 4.4 GHz 4770k and a OCed R9 290 (haven't even had time to OC it yet... just got it in an hour ago.)

 

If I do need a 120 rad, any suggestions? I don't want to spend too much money on this, but I do realize unless I can find some used stuff this is going to take about 150-170 bucks.

 

Also, block suggestions? I am new to actual full on water cooling, so I am not sure what I would want. I know alphacool has some good rads, and I am not sure at all what block I would get (I got a HIS R9 290). I wasn't planning on going full block until I broke my 620 a few days ago (forgot to turn fans up gpu got up to 104+ for a bit...).

 

Any help would be appreciated!

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

If TWO R9 290Xs can be cooled on a 120mm with decent temps (62C), then I'm pretty sure 1 R9 290 + a 4770K should be good on a 240, not saying it'll be awesome, but should suffice.

Intel Core i7-5820K (4.4 GHz) | Gigabyte GTX 970 G1 Gaming | Corsair Vengeance LPX 16GB  | 2x 360mm Custom Loop (Noctua iPPC) | ASRock X99 Extreme6 | Samsung 840 EVO 250GB | Fractal Design Define S | Corsair HX750 | Windows 10 | Corsair M65 RGB PRO | Corsair K70 RGB LUX (CherryMX Brown) | Beyerdynamic Custom One Pro & Creative Sound Blaster Z | Nexus 6P (32GB Aluminium) | Check out my setup: Project Kalte Here!

Link to comment
Share on other sites

Link to post
Share on other sites

I believe the generally accepted rule is 240mm of rad space for each component in the loop.

I would add another 240.  But if you cant afford it now you can try it on the rad you have now and see what temps you get.

01010010 01101111 01100010  01001101 01100001 01100011 01010010 01100001 01100101

Link to comment
Share on other sites

Link to post
Share on other sites

How do I find out for sure if the HIS 290 uses a reference design? Looking at pictures it looks like it is, but I know it has to be perfect or I will find myself pretty screwed :/

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

The only thing that scares me is that the pumps on those expandable units are usually not that strong....  Other than that, sounds like a good idea.

"I genuinely dislike the promulgation of false information, especially to people who are asking for help selecting new parts."

Link to comment
Share on other sites

Link to post
Share on other sites

The only thing that scares me is that the pumps on those expandable units are usually not that strong....  Other than that, sounds like a good idea.

The pump on the 240l can easily power the CPU blocks + additional rad plus two GPU blocks. So I am not to too worried about that. It has a very strong pump. It was designed to be expanded. Also it looks like my gpu is of reference design. This review has some pictures of it with the cooler off, and to me it looks identical to a pic of a reference one.

 

http://www.overclockers.com/HIS-290-IceQx2-review

 

http://www.pcper.com/files/imagecache/article_max_width/review/2014-03-14/IMG_9185_0.JPG

 

If anyone can confirm that would be great :)

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

The only thing that scares me is that the pumps on those expandable units are usually not that strong....  Other than that, sounds like a good idea.

I think that the AIO that he has is a Swiftech rebrand, so maybe it won't be that bad.

Intel Core i7-5820K (4.4 GHz) | Gigabyte GTX 970 G1 Gaming | Corsair Vengeance LPX 16GB  | 2x 360mm Custom Loop (Noctua iPPC) | ASRock X99 Extreme6 | Samsung 840 EVO 250GB | Fractal Design Define S | Corsair HX750 | Windows 10 | Corsair M65 RGB PRO | Corsair K70 RGB LUX (CherryMX Brown) | Beyerdynamic Custom One Pro & Creative Sound Blaster Z | Nexus 6P (32GB Aluminium) | Check out my setup: Project Kalte Here!

Link to comment
Share on other sites

Link to post
Share on other sites

I think that the AIO that he has is a Swiftech rebrand, so maybe it won't be that bad.

It is, it was developed by swiftech. It is a beast of a AIO.

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

It is, it was developed by swiftech. It is a beast of a AIO.

Ahh ok, if it was designed by Swiftech, then those are very good.  I didn't know CM used Swiftech technology, I thought they did it all in-house.

"I genuinely dislike the promulgation of false information, especially to people who are asking for help selecting new parts."

Link to comment
Share on other sites

Link to post
Share on other sites

Now we just need to find out if the HIS uses reference design.

Intel Core i7-5820K (4.4 GHz) | Gigabyte GTX 970 G1 Gaming | Corsair Vengeance LPX 16GB  | 2x 360mm Custom Loop (Noctua iPPC) | ASRock X99 Extreme6 | Samsung 840 EVO 250GB | Fractal Design Define S | Corsair HX750 | Windows 10 | Corsair M65 RGB PRO | Corsair K70 RGB LUX (CherryMX Brown) | Beyerdynamic Custom One Pro & Creative Sound Blaster Z | Nexus 6P (32GB Aluminium) | Check out my setup: Project Kalte Here!

Link to comment
Share on other sites

Link to post
Share on other sites

Now we just need to find out if the HIS uses reference design.

Look up at my post a few up. If you look at those pix they look identical to me. Like where all the capacitors and what not are. 

 

Also, I am looking for a reference block, and for the frikin life of me I can't find one...

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

http://www.coolingconfigurator.com/step1_complist?gpu_gpus=1303

 

Well, maybe this isn't going to work :(

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

The 290x version of my card isn't reference, but I can't seem to find ANYTHING on the normal 290 version...

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

Yea, its not reference because it has an additional PWM phase and 8+8 instead of 6+8 :(

 

Maybe I just get a block for the core? Not a full cover block.

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

I may have found a block that works! the XSPC one. The rear of the card seems to be all that differs, except the VRM area... But I should be able to get it to fit, if not, I could mill it a bit, I would just have to open up the rear most slot a bit. Water doesn't go there and it isn't structural, so I could probably do this with little issue. 

 

Now I need a good radiator, any suggestions?

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

Anyone with a better eye than me able to tell if this should fit on my card? The block I am looking at is: 

 

http://www.ncixus.com/products/?sku=92454&vpn=5060175585004&manufacture=XSPC%20Asia%20Co%2E%20Ltd%2E

 

The card it is going on is:

 

http://www.overclockers.com/HIS-290-IceQx2-review

 

The card it is "supposed" to go on is:

 

http://www.pcper.com/image/view/38516?return=node%2F59788

 

Now all I can tell is the large rectangle near the VRM area might need to be opened a little bit in order to accommodate the capacitors as they looked to be a bit closer to the RAM chips. To my eyes nothing else changes.

 

If this is the only issue, I plan to put this on a mill and open that bit up a little. I have access to my schools mills and a buddy who is a manufacturing engineering student who can even write me some CNC code if we have to get more fancy with it... Not that I want to get too fancy...

 

Ideas/suggestions welcome! And if anyone sees any other clearance issues PLEASE let me know! Its a 150 dollar gamble, but I think it can be done ;)

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

Why dont you use eks cooling configurator to see which block fits your card?

Link to comment
Share on other sites

Link to post
Share on other sites

Why dont you use eks cooling configurator to see which block fits your card?

I did, no full block of theirs fits :/. I have an extra vrm phase compared to reference but the rest is damn similar.

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

I will be keeping track of this project, as I am planning a 350D watercooling project as well. ;)

 

Good luck!

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

I have two midterms later today, but then I will be diving pretty hard into this. I talked to my buddy and he said machining a reference designed gpu block would be easy money. Even if we have to get fancy, he said we can get it done. Hell. Even if we royally fuck up, I could always dimension the one I buy, draw it out in solid works, and cnc it out of a block of copper. My 290 is going to be under water. One way or another.

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

So after doing some research, and looking at the pinned FAQ in here, it is recommended that you have one more rad space than block. I am going to have two blocks, the 4770k at an estimated 120 tdp with its OC, and a 290 with its stock 275 tdp. Assume the 290 will end up dumping something like 350 watts into the system when overclocked, and the cpu will dump no more than 110 under game load. So we are talking 460 watts of heat to dissipate. 

 

3x120 @ 1,000 rpm should suffice for sub 60c temps I believe. I would like to run cooler, but noise might prevent that. I could run the fans up to maybe 1200-1300 without being annoying in game because of game sound track + gunshots/explosions and what not. So based on 1200 rpm hopefully I can keep temps down in the 50's across both CPU and GPU.

 

For reference, currently in game my CPU is at mid 50's with 1200 RPM, and when I had my Kuhler 620 on my 40% overclocked 470 it got up to mid 70's when in a game. But that thing also pulled 100 watts more out of the wall when overclocked than stock clocked, @ stock it had a 225 tdp. But according to wall measuring, it literally drew 100 watts more when OCed, so assume a bunch of that went to heat, the 470 and OCed 290 probably dump around the same amount of heat. That being said, a full block as compared to a Kuhler 620 with a better radiator will result in better temperatures. @ stock speeds the 470 was in the 50's to 60's on the khuler. 

 

It will be close, and might not run as cool as I had previously hoped, but I think 360 total rad space should be enough. Maybe I should try and get another 120 in there somewhere. Don't really want to put rads in the front of my case because I hate the idea of blowing warm air into the case, just seems totally wrong to me.

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

I could potentially be convinced to put a 240 rad in the front of my case and blow some heat in... I could take out my harddrives, put em in another PC as I don't need them often, could relocate SSD's to behind mobo tray or something. Is blowing hot air into your case a big deal? I know many people do it, but to me it just feels backwards! 

 

But, that would give me 480 amount of rad space instead of 360.... Except all intake air will be heated by radiator, so internal case temps will go up a bunch from this :/

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

I could potentially be convinced to put a 240 rad in the front of my case and blow some heat in... I could take out my harddrives, put em in another PC as I don't need them often, could relocate SSD's to behind mobo tray or something. Is blowing hot air into your case a big deal? I know many people do it, but to me it just feels backwards! 

 

But, that would give me 480 amount of rad space instead of 360.... Except all intake air will be heated by radiator, so internal case temps will go up a bunch from this :/

This is my plan, but with 280's. It will raise internal temps but its about the only good way to add rad space in the 350D. 

 

HDD's move to a NAS and SDD's move to the back of the motherboard tray.

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

This is my plan, but with 280's. It will raise internal temps but its about the only good way to add rad space in the 350D.

HDD's move to a NAS and SDD's move to the back of the motherboard tray.

Problem is, I just can't get over the idea of dumping heat into case. I know the delta between room temp and exhaust of radiator isn't much. It just isn't "right". I think I might just get a 140 for the rear and call it good with a 240+140.

For you, I would do a top 280 and rear 140. That is equivalent to 4 120's surface area wise. Unless you have SLI or crossfire that should be just fine.

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites

Link to post
Share on other sites

Problem is, I just can't get over the idea of dumping heat into case. I know the delta between room temp and exhaust of radiator isn't much. It just isn't "right". I think I might just get a 140 for the rear and call it good with a 240+140.

For you, I would do a top 280 and rear 140. That is equivalent to 4 120's surface area wise. Unless you have SLI or crossfire that should be just fine.

I'm not a huge fan of rear mounted rads, just because of the aesthetics. My plan is SLI'ed 980's. Even then 4x worth of 140's is overkill but I dont want the fans to be spinning very fast. No one has ever been hurt by increasing the rad space ;)

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×