Jump to content

Random freezes followed by black screen

Archangel1994
By Archangel1994
in Troubleshooting
 Share
Posted

Hey guys,

Sometimes when I start my PC and log in as I normally do my PC will freeze. After a few seconds the screen will go black and the graphics card fans will start spinning at 100%. The PC then doesn't respond to anything I do until I restart it, then it doesn't happen. This usually only happens on booting the PC and nowhere else.

 

Specs:

MSI P67A-G45

I5-2400 @ 3,1GHz (stock)

12GB DDR3 1333MHz

Sapphire Dual-X HD7870XT

Samsung 840 EVO 120GB SSD

Seagate 1TB HDD

 

Oddly enough this problem started when I downloaded Sapphire TRIXX Utility and used it to crank up the fan speed to 60% fixed instead of using a curve but simply adjusting this can't be it right?

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Nobody? :c

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Try scanning for malware first... I'd suggest avast's boot time scan function... Then do chkdsk C: /r...

Also, try not to run TRIXX for a while and reset your clocks to stock...

 

I'm not really sure what's going on based on just the description but my R7 260X based system fail similarly a few times on me...

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Try scanning for malware first... I'd suggest avast's boot time scan function... Then do chkdsk C: /r...

I run malware checks monthly and did the boot time scan yesterday. Chkdsk came up with nothing.

 

Also, try not to run TRIXX for a while and reset your clocks to stock...

I didn't fiddle with my clocks, only with the fan speed which i set to fixed 60%.

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

try to boot to safe mode and remove the TRIXX program and boot normally

Budget? Uses? Currency? Location? Operating System? Peripherals? Monitor? Use PCPartPicker wherever possible. 

Quote whom you're replying to, and set option to follow your topics. Or Else we can't see your reply.

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I run malware checks monthly and did the boot time scan yesterday. Chkdsk came up with nothing.

 

I didn't fiddle with my clocks, only with the fan speed which i set to fixed 60%.

 

Not sure what the problem is at this point... You are running the 14.4 Catalyst Drivers and not the beta ones, right?

 

I'm not suspecting the hardware (yet) so let's rule out the software... Does it crash like this only when you boot or does it happen any time else?

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Not sure what the problem is at this point... You are running the 14.4 Catalyst Drivers and not the beta ones, right?

 

I'm not suspecting the hardware (yet) so let's rule out the software... Does it crash like this only when you boot or does it happen any time else?

Pretty much restricted to within 30 seconds of my pc finishing booting.

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Pretty much restricted to within 30 seconds of my pc finishing booting.

 

Does this also happen when you stay in the bios?

Mutsuki:

CPU: AMD A8 5600K @ 4.2GHz | Motherboard: Gigabyte GA-F2A55M-DS2 (rev. 1.0) | RAM: 2 x Kingston Low Profile 4GB 1333MHz | GPU: Sapphire R7 260X OC 2GB DDR5 2xDVI | HDD0: Seagate Barracuda 500GB 7200RPM 3.5" (SATA II) | HDD1: WD Elements (WD Blue 1TB 3.5" SATA II) connected via USB 2.0 | HDD2: Seagate Barracuda 1TB 7200rpm (SATA II) | DVD: Samsung DVD+RW combo drive | PSU: FSP Hexa 600W | Case: Aerocool PGS V | Cooling: DeepCool Gammaxx S40 (stock fan), 2x 120mm Aerocool fan 1xDeepCool 120mm fan from a scrapped heatsink

eMachines D732Z | CPU: Intel Pentium D P6100 | GPU: Intel HD 3000 | RAM: 2x Kingston ValueRAM 2GB 1066MHz SODIMM | HDD: Hitachi 320GB 5600RPM

Acer ES13 | CPU: Intel Pentium N4200 | GPU:  Intel HD 505 | RAM: 1x 4GB (unidentified) DDR3L | HDD: (unidentified) 500GB 5600RPM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Not when I stay in the bios no.

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Had the same problem a few months ago with my 560ti on windows 8 with the latest nvidia drivers (337.88) couldn't find the issue so I just reinstalled windows 7 and all is fine now

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Had the same problem a few months ago with my 560ti on windows 8 with the latest nvidia drivers (337.88) couldn't find the issue so I just reinstalled windows 7 and all is fine now

Yea I'm not keen on reinstalling windows just for this. It's an annoyance yea but I can deal with it if that is the only thing that would solve it.

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×