Jump to content

What to 3D Print??

Cy-Fy
By Cy-Fy
in Cases and Mods
 Share
Posted

So at my school I was given the opportunity to 3d print anything I want, it could be a key ring or even something cool that sits on my desk. The only problem is that I don't have a clue about what to print, any ideas???? Also guys it cannot be super huge, probably about the size of a memory stick.

Ps: I just though about some kind of gear system but not sure O_o

Dell XPS 15 9560 - Nikon Z5 - Galaxy S10+

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

print an LLT logo Badge :)

CPU: Intel i7 4790K @4.8GhZ  CPU Cooler: Be Quiet! Dark Rock Pro 2  Motherboard: Gigabyte Z97 UD3H  GPU: Asus ROG RX 480 8G OC Memory: 32GB Gskill Ares 2400Mhz  Storage: 2x Crucial M4 512GB SSD (raid0)  / 1TB Seagate FireCuda SSHD Case: Phanteks Enthoo Evolv ATX PSU: EVGA SuperNOVA P2 750W  Operating System: Windows 10 Enterprise LTSB (64 bit) Other: NZXT Hue+ LED Controller with 8 LED Strips for desk and PC lighting

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

A car?

Main Rig: -FX8150 -32gb Kingston HyperX BLUE -120gb Kingston HyperX SSD -1TB WD Black -ASUS R9 270 DCUII OC -Corsair 300r -Full specs on Profile


Other Devices: -One Plus One 64gb Sandstone Black -Canon T5 -Moto G -Pebble Smartwatch -Nintendo 2DS -G27 Racing Wheel


#PlugYourStuff - 720penis - 1080penis - #KilledMyWife - #LinusButtPlug - #HashtagsAreALifestyle - CAR BOUGHT: 2010 Corolla

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

rpg-7-launcher.gif

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

3D Print a DOMO figure? :P

EDIT: I take that back, 3D print a USB drive and whenever your friends need a flash drive just give them that. >.<

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I've printed a case for my iPhone 4s a while ago, it was pretty fun and the quality wasn't bad.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

3d print a 3d printer.

But in all seriousness... nope 0 ideas

Stock coolers - The sound of bare minimum

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

A car?

yeah I was trying to do that but I think it's not too creative

Dell XPS 15 9560 - Nikon Z5 - Galaxy S10+

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

print an LLT logo Badge :)

mm yeah what about something I could put on my desk?

Dell XPS 15 9560 - Nikon Z5 - Galaxy S10+

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

rpg-7-launcher.gif

 

Close... But not quite...

 

RPC_zpsda308cc4.jpg

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@Barnacules 3D printed a pretty cool usb drive holder, but unless u have a ton of usb drives (like he does), its kinda pointless

 

how bout a miniature GabeN statue? :D

AMD FX 8350 8-Core CPU (Stock 4GHz) | Gigabyte GA-990FXA-UD3 | (Rev. 4.0) | 8GB 1600MHz HyperX Fury | AMD R9 270 (MSI Gaming OC Edition) | NZXT H440 (White) | Kingston 120GB SSDnow V300 | Seagate Barracuda 1TB (7200 RPM) | Corsair RM750m 750w Fully Modular Power Supply

Dell 23.6-Inch 1080p 60hz IPS Display | Corsair H100i AIO Liquid Cooler | Logitech G710+ Mechanical Gaming Keyboard | Logitech G502 Proteus Core | iSymphony Wireless Stereo Speakers | Windows 8.1 (64-bit)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

A small action figure? It's really limited with the size. I would print some badge for a key chain, probably ROG or something like that.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Print a personalised badge for your case of something like that.

The Mistress: Case: Corsair 760t   CPU:  Intel Core i7-4790K 4GHz(stock speed at the moment) - GPU: MSI 970 - MOBO: MSI Z97 Gaming 5 - RAM: Crucial Ballistic Sport 1600MHZ CL9 - PSU: Corsair AX760  - STORAGE: 128Gb Samsung EVO SSD/ 1TB WD Blue/Several older WD blacks.

                                                                                        

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you play an instrument, 3d print that instrument....unless it's a piano, cause size.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Nothing says spending thousands on a 3D printer worth it by printing a badly rendered toy doll and in one color.

I roll with sigs off so I have no idea what you're advertising.

 

This is NOT the signature you are looking for.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

An earphone tidy, so you can coil the wires up and have them not get tangled on you if you put them away somewhere

PCs

Spoiler
Spoiler

Branwen (2015 build) - CPU: i7 4790K GPU:EVGA GTX 1070 SC PSU: XFX XTR 650W RAM: 16GB Kingston HyperX fury Motherboard: MSI Z87 MPower MAX AC SSD: Crucial MX100 256GB + Crucial MX300 1TB  Case: Silverstone RV05 Cooler: Corsair H80i V2 Displays: AOC AGON AG241QG & BenQ BL2420PT Build log: link 

Spoiler

Netrunner (2020 build) - CPU: AMD R7 3700X GPU: EVGA GTX 1070 (from 2015 build) PSU: Corsair SF600 platinum RAM: 32GB Crucial Ballistix RGB 3600Mhz cl16 Motherboard: Gigabyte Aorus X570i pro wifi SSD: Sabrent Rocket 4.0 1TB Case: Lian Li TU150W black Cooler: Be Quiet! Dark Rock Slim

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'm a fan of 3D printed adult toys.  ;)

 

Or car parts

CPU: 3770K | Motherboard: Asus Maximus V Formula | GPU: GTX 1080Ti SLI | Ram: 16gb Corsair Dominator Platinum 2133 | PSU: Corsair AX1200i | Storage: 2x Samsung 840 pros | Case: Corsair 650D | Cooler:  Corsair H100i with Noctus NF-F12 fans | Monitor: Asus ROG Swift PG278Q

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Print spoilers and go around the parking lot gluing them onto random cars.

NZXT Phantom|FX-8320 @4.4GHz|Gigabyte 970A-UD3P|240GB SSD|2x 500GB HDD|16GB RAM|2x AMD MSI R9 270|2x 1080p IPS|Win 10

Dell Precision M4500 - Dell Latitude E4310 - HTC One M8

$200 Volvo 245

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×