Exclusive: N9005XXUENA6 – Leaked Android 4.4.2 KitKat Test Firmware for Galaxy Note 3 (SM-N9005)

mgsstar · January 13, 2014

Well, after leaking an Android 4.2.2 test build for the Galaxy S4, our Galaxy Note 3 members felt a little bit disappointed. To cheer them up, we have obtained a brand new Android 4.4.2 test firmware – N9005XXUENA6 - for the Samsung Galaxy Note 3 (SM-N9005).

Model: SM-N9005

Country: Open Europe

Version: Android 4.4.2

Changelist: 340325

Build date: Thu, 9 Jan 2014 23:09:09 +0000

Product Code: OXX

PDA: N9005XXUENA6

CSC: N9005OXXENA5

MODEM: N9005XXUENA2

Download: N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX.zip

NOTE

- This test firmware WILL wipe your data. So, back it up!

- You are doing this at your OWN risk. We are not responsible if you brick your device or your cat eats your phone.

- This test firmware will NOT increase your binary counter NOR void your warranty.

- This test firmware is a pre-release build and not official from Samsung.

INSTRUCTIONS

- Extract (unzip) the firmware file

- Download Odin3 v3.09 (From here or here)

- Extract Odin .ZIP file

- Open Odin3 v3.09

- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)

- Connect phone and wait until you get a blue sign in Odin

- Add AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to AP

- Add BL_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to BL

- Add CP_N9005XXUENA2_REV03_CL1277177.tar.md5 to CP

- Add CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar.md5 to CSC

- Make sure re-partition is NOT ticked

- Click start button, sit back and wait a few minutes.

- If you encounter any issues with the firmware (Any FC, Bootloop etc)

- Boot into recovery mode (Home+power+vol up)

- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)

- Then choose reboot and you should be good to go!