Jump to content

Wireless Adapter vs Range Extender?

Go to solution Solved by Oshino Shinobu,

The second set should work fine. However, you will be limited to 200Mbps on both connections (theoretically half that for each PC if they're maxing the connection at the same time), so it could be an issue for transfers across the local network, if you have any fast network storage. 

 

If you don't have that, then they'll work fine. 

I have a small issue and I wanted to know if anyone can help me with it. Basically I have two PC in my room. One strictly for gaming and the other is my media center. I wanted to know what would be the best way for me to get internet access to one or both of my machines. Plugging in through Ethernet isn't an option, it is 80 feet away from my location and I can't have two 100 foot Ethernet cables going through my kitchen. So, should I use 2 wireless adapters for both of them, or can I use a range extender to plug them in through Ethernet?

 

(My knowledge of networking is very low so, any help is appreciated.)

Link to comment
Share on other sites

Link to post
Share on other sites

You can use a powerline adapter to a switch to the PCs. That way you have two, close to hardline connections. Or you can use two pairs of powerline adapters. 

Link to comment
Share on other sites

Link to post
Share on other sites

The Range Extender, I'm assuming you mean something like a bridge, would be a little more complex, and offer few, if any benefits, I would grab a couple, nice wireless nics, and connect the best you can. you are always dealing with the range issue, but eliminating a point of failure would be prudent in my view!

vSphere Cluster - 72 Cores - 512GB Memory - 6TB SSD RAW - 42TB HDD RAW - vSphere 7

resonance - Dell PowerEdge R730xd - 2x Intel E5-2667 v3 - 128GB DDR4 @ 2400MHz - NVIDIA RTX 5000 - 2x250GB Samsung 870 Pro - 2x1100W 80+ Plat - ESXi 7.0U3

kat - Dell PowerEdge R630 - 2x Intel E5-2690 v3 - 256GB DDR4 @ 2400MHz - NVIDIA TESLA P4 - 500GB PNY SSD - 4x1TB Crucial SSD - 2x750W 80+ Plat - ESXi 7.0U3

starlifter - Dell PowerEdge R720 - 2x Intel E5-2650 v2 - 96GB DDR3 @ 1333MHz - 2xNVIDIA GTX 970 + 1050Ti - 500GB SSD - 7x6TB HGST HDD - 2x1100W 80+ Plat - ESXi 7.0U3

ion - Dell PowerEdge R620 - 2x Intel E5-2650 v2 - 32GB DDR3 @ 1333MHz - NVIDIA QUADRO M2000 - 2x250GB Samsung 870 Pro -2x750W 80+ Plat - ESXi 7.0U3

 

Main Rig

Intel i7-5820K @ 4.6GHz

MSI X99S Krait SLI Edition

32GB Crucial Ballistix Sport DDR4 @ 2400MHz

Aorus GTX 1080Ti Waterforce Xtreme

Intel 280GB 900p

512GB Crucial NvMe

512GB Samsung 860 Evo

EVGA Supernova 850 G2

Thermaltake Core P5

Link to comment
Share on other sites

Link to post
Share on other sites

You can use a powerline adapter to a switch to the PCs. That way you have two, close to hardline connections. Or you can use two pairs of powerline adapters. 

 

Or this ^ This is a fabulous idea.

vSphere Cluster - 72 Cores - 512GB Memory - 6TB SSD RAW - 42TB HDD RAW - vSphere 7

resonance - Dell PowerEdge R730xd - 2x Intel E5-2667 v3 - 128GB DDR4 @ 2400MHz - NVIDIA RTX 5000 - 2x250GB Samsung 870 Pro - 2x1100W 80+ Plat - ESXi 7.0U3

kat - Dell PowerEdge R630 - 2x Intel E5-2690 v3 - 256GB DDR4 @ 2400MHz - NVIDIA TESLA P4 - 500GB PNY SSD - 4x1TB Crucial SSD - 2x750W 80+ Plat - ESXi 7.0U3

starlifter - Dell PowerEdge R720 - 2x Intel E5-2650 v2 - 96GB DDR3 @ 1333MHz - 2xNVIDIA GTX 970 + 1050Ti - 500GB SSD - 7x6TB HGST HDD - 2x1100W 80+ Plat - ESXi 7.0U3

ion - Dell PowerEdge R620 - 2x Intel E5-2650 v2 - 32GB DDR3 @ 1333MHz - NVIDIA QUADRO M2000 - 2x250GB Samsung 870 Pro -2x750W 80+ Plat - ESXi 7.0U3

 

Main Rig

Intel i7-5820K @ 4.6GHz

MSI X99S Krait SLI Edition

32GB Crucial Ballistix Sport DDR4 @ 2400MHz

Aorus GTX 1080Ti Waterforce Xtreme

Intel 280GB 900p

512GB Crucial NvMe

512GB Samsung 860 Evo

EVGA Supernova 850 G2

Thermaltake Core P5

Link to comment
Share on other sites

Link to post
Share on other sites

You can use a powerline adapter to a switch to the PCs. That way you have two, close to hardline connections. Or you can use two pairs of powerline adapters. 

 

 

Or this ^ This is a fabulous idea.

Would something like this be fine?

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16833704164&nm_mc=KNC-GoogleAdwords-PC&cm_mmc=KNC-GoogleAdwords-PC-_-pla-_-Powerline+Networking-_-N82E16833704164&gclid=Cj0KEQjwvJqvBRCL77m2-uKczsIBEiQAkx8VjPNlMHOhVW4R9P2aeCJtvAaJABGv4JBjNrNxcnJ7IdoaAuiV8P8HAQ&gclsrc=aw.ds

Link to comment
Share on other sites

Link to post
Share on other sites

I have a small issue and I wanted to know if anyone can help me with it. Basically I have two PC in my room. One strictly for gaming and the other is my media center. I wanted to know what would be the best way for me to get internet access to one or both of my machines. Plugging in through Ethernet isn't an option, it is 80 feet away from my location and I can't have two 100 foot Ethernet cables going through my kitchen. So, should I use 2 wireless adapters for both of them, or can I use a range extender to plug them in through Ethernet?

 

(My knowledge of networking is very low so, any help is appreciated.)

 

Powerline as said has my vote, range extenders loose performance and speed as you extend it further from the main access point/router.

Link to comment
Share on other sites

Link to post
Share on other sites

The Range Extender, I'm assuming you mean something like a bridge, would be a little more complex, and offer few, if any benefits, I would grab a couple, nice wireless nics, and connect the best you can. you are always dealing with the range issue, but eliminating a point of failure would be prudent in my view!

bridging is easy with asus routers like my 87u or the 68u :P 

Current Build : 

 
CASE: Fractal Design R4 w/Window CPU: Intel 4930K,  RAM: 16GB Ripjaws Z 2133Mhz  Cooling: H100i  MotherBoard: Asus P9x79 Pro , PSU: CS750M   Storage: 2x Samsung 840 Pro 256Gb , 1Tb Seagate Barracuda, 500GB WD Black,  Graphics: Gigabyte GTX 780 Windforce 3GB,  Monitors: AOC G2460PG ( G sync monitor), Edge10 24" 1080p , 24" 1680*1020p monitor ( LCD)  Microphone: Blue Yeti  Keyboard: Cougar 700k  Phone: Samsung Note 3  Headphones: Sennheiser HD598

Laptop:

 CPU: 
4710MQ  Ram: 8GB 1600MHz Storage:120Gb 840 Evo + 1Tb 5400Rpm HDD  Graphics: GTX 850M 2GB   Screen: 1080p IPS  
Link to comment
Share on other sites

Link to post
Share on other sites

Link to comment
Share on other sites

Link to post
Share on other sites

The second set should work fine. However, you will be limited to 200Mbps on both connections (theoretically half that for each PC if they're maxing the connection at the same time), so it could be an issue for transfers across the local network, if you have any fast network storage. 

 

If you don't have that, then they'll work fine. 

Link to comment
Share on other sites

Link to post
Share on other sites

The second set should work fine. However, you will be limited to 200Mbps on both connections (theoretically half that for each PC if they're maxing the connection at the same time), so it could be an issue for transfers across the local network, if you have any fast network storage. 

 

If you don't have that, then they'll work fine. 

What if my download speed is 6 megabits?

Link to comment
Share on other sites

Link to post
Share on other sites

What if my download speed is 6 megabits?

 

Yes that would be adequate since it can has a throughput of 200megabit as long as the wiring in the home is good, if you require also wifi in that area and don't have a good connection there are kits that contain a wifi and ethernet option like this:

http://www.newegg.com/Product/Product.aspx?Item=N82E16833704197

Link to comment
Share on other sites

Link to post
Share on other sites

Yes that would be adequate since it can has a throughput of 200megabit as long as the wiring in the home is good, if you require also wifi in that area and don't have a good connection there are kits that contain a wifi and ethernet option like this:

http://www.newegg.com/Product/Product.aspx?Item=N82E16833704197

 

 

Then it's fine

Thank you both, everyone has really helped me a lot.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×