Jump to content

H100i in 250D with fury x space questions

Go to solution Solved by TheSLSAMG,

I got a fury x, H100i and a 250D. First question, does anyone know if this is doable?

2nd, can you put the h100i in where the tubes are at the back, or does that obstruct the back I/O?

3rd, Can I mount an H60 to the side panel?

4th, When is space jam 2 coming out?

1. It's definitely doable. It will be a little tight but it will work.

2. You can mount the H100i with the tubes in the back. You might have to squeeze some stuff, and with a handful of boards it may not work out. The tubes can be mounted in the front and still fit the Fury X though.

3. You can't mount it to the side panel or rear, however it will fit in the front.

4. No idea :P

 

Reference:

 

500x1000px-LL-029f62d6_DSC01117.jpeg

 

20140601_144125.jpg

Okay, so i'm being super impatient right now because my motherboard hasn't yet arrived(its the last piece of the puzzle), but I would like to know couple of things. I got a fury x, H100i and a 250D. First question, does anyone know if this is doable? 2nd, can you put the h100i in where the tubes are at the back, or does that obstruct the back I/O? 3rd, Can I mount an H60 to the side panel? 4th, When is space jam 2 coming out?

 

So background I started putting stuff in the case and it dawned on me that these things might not all fit together. First i put the h100i together and mounted it to the side with the tubes towards the front, however when i went to mount the fury x to the the front i could not because the tubes from the H100i were in the way. So i took out the fury x, removed the h100i, mounted the fury x, and put the h100i tubes at the back. This is currently where I am at and I don't quite think it'll work because the bottom tube is right where the left-hand  I/O would be(haven't gotten mobo yet, so don't know). This lead me to look up which other corsair(i know they don't have to be corsair, i'm just being picky) coolers could fit, and it also listed the h60 and the h55. So secret 5th question if you managed to read this far, which would work, and which would work better?

 

TL;DR: I really can't wait for my moba to get here and the first paragraph has all the questions, also I i'm an idiot for not doing more research. 

Link to comment
Share on other sites

Link to post
Share on other sites

Okay, so i'm being super impatient right now because my motherboard hasn't yet arrived(its the last piece of the puzzle), but I would like to know couple of things. I got a fury x, H100i and a 250D. First question, does anyone know if this is doable? 2nd, can you put the h100i in where the tubes are at the back, or does that obstruct the back I/O? 3rd, Can I mount an H60 to the side panel? 4th, When is space jam 2 coming out?

 

So background I started putting stuff in the case and it dawned on me that these things might not all fit together. First i put the h100i together and mounted it to the side with the tubes towards the front, however when i went to mount the fury x to the the front i could not because the tubes from the H100i were in the way. So i took out the fury x, removed the h100i, mounted the fury x, and put the h100i tubes at the back. This is currently where I am at and I don't quite think it'll work because the bottom tube is right where the left-hand  I/O would be(haven't gotten mobo yet, so don't know). This lead me to look up which other corsair(i know they don't have to be corsair, i'm just being picky) coolers could fit, and it also listed the h60 and the h55. So secret 5th question if you managed to read this far, which would work, and which would work better?

 

TL;DR: I really can't wait for my moba to get here and the first paragraph has all the questions, also I i'm an idiot for not doing more research. 

The mounting should work fine.

You are on a need to know basis, and you don't need to know.

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

I got a fury x, H100i and a 250D. First question, does anyone know if this is doable?

2nd, can you put the h100i in where the tubes are at the back, or does that obstruct the back I/O?

3rd, Can I mount an H60 to the side panel?

4th, When is space jam 2 coming out?

1. It's definitely doable. It will be a little tight but it will work.

2. You can mount the H100i with the tubes in the back. You might have to squeeze some stuff, and with a handful of boards it may not work out. The tubes can be mounted in the front and still fit the Fury X though.

3. You can't mount it to the side panel or rear, however it will fit in the front.

4. No idea :P

 

Reference:

 

500x1000px-LL-029f62d6_DSC01117.jpeg

 

20140601_144125.jpg

Main Rig: CPU: AMD Ryzen 7 5800X | RAM: 32GB (2x16GB) KLEVV CRAS XR RGB DDR4-3600 | Motherboard: Gigabyte B550I AORUS PRO AX | Storage: 512GB SKHynix PC401, 1TB Samsung 970 EVO Plus, 2x Micron 1100 256GB SATA SSDs | GPU: EVGA RTX 3080 FTW3 Ultra 10GB | Cooling: ThermalTake Floe 280mm w/ be quiet! Pure Wings 3 | Case: Sliger SM580 (Black) | PSU: Lian Li SP 850W

 

Server: CPU: AMD Ryzen 3 3100 | RAM: 32GB (2x16GB) Crucial DDR4 Pro | Motherboard: ASUS PRIME B550-PLUS AC-HES | Storage: 128GB Samsung PM961, 4TB Seagate IronWolf | GPU: AMD FirePro WX 3100 | Cooling: EK-AIO Elite 360 D-RGB | Case: Corsair 5000D Airflow (White) | PSU: Seasonic Focus GM-850

 

Miscellaneous: Dell Optiplex 7060 Micro (i5-8500T/16GB/512GB), Lenovo ThinkCentre M715q Tiny (R5 2400GE/16GB/256GB), Dell Optiplex 7040 SFF (i5-6400/8GB/128GB)

Link to comment
Share on other sites

Link to post
Share on other sites

1. It's definitely doable. It will be a little tight but it will work.

2. You can mount the H100i with the tubes in the back. You might have to squeeze some stuff, and with a handful of boards it may not work out. The tubes can be mounted in the front and still fit the Fury X though.

3. You can't mount it to the side panel or rear, however it will fit in the front.

4. No idea :P

 

 

Thank you.

Link to comment
Share on other sites

Link to post
Share on other sites

1. It's definitely doable. It will be a little tight but it will work.

2. You can mount the H100i with the tubes in the back. You might have to squeeze some stuff, and with a handful of boards it may not work out. The tubes can be mounted in the front and still fit the Fury X though.

3. You can't mount it to the side panel or rear, however it will fit in the front.

4. No idea :P

 

Yeah, thank you. I got it together. it was quite the squeeze with the mother board, but its running great. Much quieter than my other rig.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×