PETG in canada?

[gt403cyl]

I'm looking at going PETG for my loop and was looking for Primochill 1/2" O.D. PETG  I checked Dazmode and they don't carry it, they do carry:

https://www.dazmode.com/store/product/none-chamfer-petg-link-tube-od-12mm-length-500mm/

 

Does anyone know a place in Canada that sells the 24" or 36" lengths of 1/2" Primochill PETG in the 4 packs or 12 packs or similar?

 

I could get it from Primochill direct but they want $75 shipping for a $15 order..... plus probably coming from the US so duty and what not after...

[gazabi]

I'm looking at going PETG for my loop and was looking for Primochill 1/2" O.D. PETG  I checked Dazmode and they don't carry it, they do carry:

https://www.dazmode.com/store/product/none-chamfer-petg-link-tube-od-12mm-length-500mm/

 

Does anyone know a place in Canada that sells the 24" or 36" lengths of 1/2" Primochill PETG in the 4 packs or 12 packs or similar?

 

I could get it from Primochill direct but they want $75 shipping for a $15 order..... plus probably coming from the US so duty and what not after...

Does it have to be primochill?

[gt403cyl]

Does it have to be primochill?

no not really I guess, but I haven't heard anything bad about their's, is there a better option?

[W-L]

no not really I guess, but I haven't heard anything bad about their's, is there a better option?

 

If your going to the US soon order it from Performance PC's but in terms of watercooling supplier in Canada it's only Dazmode and NCIX really and they don't carry PETG, the only carry EKWB acrylic. 

 

Between the two if you want PETG I'd go for the Dazmode one it's made by Bitspower and I've never had anything bad with their stuff.

[gt403cyl]

 

If your going to the US soon order it from Performance PC's but in terms of watercooling supplier in Canada it's only Dazmode and NCIX really and they don't carry PETG, the only carry EKWB acrylic. 

 

Between the two if you want PETG I'd go for the Dazmode one it's made by Bitspower and I've never had anything bad with their stuff.

So will this work with other 1/2" hard tube fittings?

https://www.dazmode....m-length-500mm/

 

It says 12mm which is actually a bit smaller than 1/2" (1/2" = 12.7mm)

 

That was the main reason I wanted the Primochill stuff as it's labeled 1/2" for 1/2" fittings...

[W-L]

-SNIP-

 

 

In hardline tubing there are a lot of discrepancies in the measurements from nominal to actual sizes but if it says 12mm I would go with 12mm fittings to ensure it fits. Dazmode should have that exact 12mm compression hardline fitting also.

[gt403cyl]

In hardline tubing there are a lot of discrepancies in the measurements from nominal to actual sizes but if it says 12mm I would go with 12mm fittings to ensure it fits. Dazmode should have that exact 12mm compression hardline fitting also.

yes they do, these are what I'm going to pair it with. which should be right

https://www.dazmode.com/store/product/g14-bitspower-multi-link-adapter-10mm-black-single-fitting

[W-L]

yes they do, these are what I'm going to pair it with. which should be right

https://www.dazmode.com/store/product/g14-bitspower-multi-link-adapter-10mm-black-single-fitting

 

That one will work but I highly recommend the compression version that one is mainly design for going between multi GPU's and are only held in by friction.

Theses one are two parts and compress the o-ring itself so it applied pressure onto the PETG walls to seal:

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-matte-black/

[gt403cyl]

That one will work but I highly recommend the compression version that one is mainly design for going between multi GPU's and are only held in by friction.

Theses one are two parts and compress the o-ring itself so it applied pressure onto the PETG walls to seal:

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-matte-black/

They are out of stock on them.

 

but thanks for differentiating them.

[W-L]

They are out of stock on them.

 

but thanks for differentiating them.

 

Yeah you could probably contact them to see how long it will take for an order. They do have black sparkle and white but that might not fit your color scheme:

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-black-sparkle/

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-deluxe-white/

[gt403cyl]

Yeah you could probably contact them to see how long it will take for an order. They do have black sparkle and white but that might not fit your color scheme:

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-black-sparkle/

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-deluxe-white/

Yeah I saw them, the color scheme is Black and UV blue, the white will not work but the black sparkle might look ok, I know they on holidays from July 1-10 so I won't be placing my next order for a bit anyways but if it will be a while I may just go with the black sparkle.

 

Thanks for the help.

[gt403cyl]

Yeah you could probably contact them to see how long it will take for an order. They do have black sparkle and white but that might not fit your color scheme:

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-black-sparkle/

https://www.dazmode.com/store/product/g14-enhanced-multi-link-adapter-12mm-od-rigid-tube-deluxe-white/

One other question, I'm also having trouble finding a silicon insert for bending again all us sources are wanting like $25-$30 to ship a $3 order and Dazmode doesn't have any on the site...

[W-L]

One other question, I'm also having trouble finding a silicon insert for bending again all us sources are wanting like $25-$30 to ship a $3 order and Dazmode doesn't have any on the site...

 

Icemodz had some for a decent price but they are currently on holiday but should come back very soon. Mcmaster Carr would have stuff like that for sure but as usual Canadian shipping....