Jump to content

New built PC won't boot up!

_Art3mis_
 Share
Go to solution Solved by c3p0,

This should work with your board. As they pretty much use all the same bios. 

 

http://www.youtube.com/watch?v=tIdj0i7AxCI

 

Writing it down as I has nothing else to do.

 

Download

http://rufus.akeo.ie/downloads/rufus-1.4.9.exe

http://download.msi.com/bos_exe/7851v17.zip

 

Run the tool and select

  • Quick format
  • Create bootable disk useing msdos 
  • Create extended label

After formating unzip the content from the zip to the usb drive. There is a folder in the zip. So make sure to copy the 3 files within the folder 

  • 7851v1x
  • AFUDE238
  • E7851IMS.170

Are the 3 files to copy

 

Boot into the usb selecting legacy boot not efi boot

Type afude238 e7581ims.170

 

If it won't start try type the names in capitals

 

Hit enter and wait for complete. Don't pull the power or reset. This will brick your board!

Posted
  • Solution

This should work with your board. As they pretty much use all the same bios. 

 

http://www.youtube.com/watch?v=tIdj0i7AxCI

 

Writing it down as I has nothing else to do.

 

Download

http://rufus.akeo.ie/downloads/rufus-1.4.9.exe

http://download.msi.com/bos_exe/7851v17.zip

 

Run the tool and select

  • Quick format
  • Create bootable disk useing msdos 
  • Create extended label

After formating unzip the content from the zip to the usb drive. There is a folder in the zip. So make sure to copy the 3 files within the folder 

  • 7851v1x
  • AFUDE238
  • E7851IMS.170

Are the 3 files to copy

 

Boot into the usb selecting legacy boot not efi boot

Type afude238 e7581ims.170

 

If it won't start try type the names in capitals

 

Hit enter and wait for complete. Don't pull the power or reset. This will brick your board!

Bye LTT. That was an interesting journey on this board. At least here you see how not to do it. I'll go shaking my head about this place.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I called the reseller and I am now going to "trade" the i5 4460 (Costa Rica) for an 4430 or 4440.

 

Now one last question before I go and deliver this one - The 4440 needs an 7851v11 BIOS/UEFI, the 4430 needs the 7851v10.

The one I used with this Motherboard before, the 4670k, needs an 7851v10.

 

Should I risk another incompatibility by taking the 4440 @3,1GHz or just take the 4430 @3GHz and have the same required Version?

Of course, it is completly normal to have a GPU at 90°c all the time <_< 

 

Java, Sysadmin, Network Engineer, Project Management

 

 

Love you all - thanks for helping me! ^_^

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You can flash to the latest bios as this is backwards compatible to older cpu's.

Bye LTT. That was an interesting journey on this board. At least here you see how not to do it. I'll go shaking my head about this place.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

This should work with your board. As they pretty much use all the same bios. 

 

http://www.youtube.com/watch?v=tIdj0i7AxCI

 

Writing it down as I has nothing else to do.

 

Download

http://rufus.akeo.ie/downloads/rufus-1.4.9.exe

http://download.msi.com/bos_exe/7851v17.zip

 

Run the tool and select

  • Quick format
  • Create bootable disk useing msdos 
  • Create extended label

After formating unzip the content from the zip to the usb drive. There is a folder in the zip. So make sure to copy the 3 files within the folder 

  • 7851v1x
  • AFUDE238
  • E7851IMS.170

Are the 3 files to copy

 

Boot into the usb selecting legacy boot not efi boot

Type afude238 e7581ims.170

 

If it won't start try type the names in capitals

 

Hit enter and wait for complete. Don't pull the power or reset. This will brick your board!

 

Thank you for your time :)

 

 

You can flash to the latest bios as this is backwards compatible to older cpu's.

 

But this needs me to undo my complete PC on which I am writing now, and in my opinion this is not worth the difference between a 4460 @3,2GHz and a 4430 @3GHz (they not even overclock so...)

Of course, it is completly normal to have a GPU at 90°c all the time <_< 

 

Java, Sysadmin, Network Engineer, Project Management

 

 

Love you all - thanks for helping me! ^_^

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

No I meant after installing the 4th gen haswell 4430 you should flash the bios anyways to avoid future problems. When your friend upgrade in the future to a better cpu it will run into the same issue again. So do the future-you a favour and flash it once you get the 4430. 

Bye LTT. That was an interesting journey on this board. At least here you see how not to do it. I'll go shaking my head about this place.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

No I meant after installing the 4th gen haswell 4430 you should flash the bios anyways to avoid future problems. When your friend upgrade in the future to a better cpu it will run into the same issue again. So do the future-you a favour and flash it once you get the 4430. 

 

Yeah, great idea :)

Of course, it is completly normal to have a GPU at 90°c all the time <_< 

 

Java, Sysadmin, Network Engineer, Project Management

 

 

Love you all - thanks for helping me! ^_^

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

First off - thank you for helping me figure out the issue!

I now got the 4460 to the vendor and I now have to wait about 2-5 days for the new one to arrive - I'll get back to you guys then :)

Of course, it is completly normal to have a GPU at 90°c all the time <_< 

 

Java, Sysadmin, Network Engineer, Project Management

 

 

Love you all - thanks for helping me! ^_^

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Mindfactory oder Caseking. mf ist da schneller. For gossip join us here http://linustechtips.com/main/topic/156391-german-talk/

 

^

Tehe sorry, had to. Keeping it on watchlist if there is still something open. No problem, welcome :)

Bye LTT. That was an interesting journey on this board. At least here you see how not to do it. I'll go shaking my head about this place.

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted
  • Author

A really big thank you to you (lol) :D

 

Yep, that was the problem! Funny enough, it was not my fault but the search engine's one - On the main filters you can seperate between Haswell and HW-Refresh but in the product description itself it only said HASWELL so I thought it should work fine <_<

 

My "customer"/friend is happy and can now play BF4 on Ultra ;)

Have a nice day!  :lol: 

Of course, it is completly normal to have a GPU at 90°c all the time <_< 

 

Java, Sysadmin, Network Engineer, Project Management

 

 

Love you all - thanks for helping me! ^_^

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Cool :D

Bye LTT. That was an interesting journey on this board. At least here you see how not to do it. I'll go shaking my head about this place.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×